Felo Magnetic T-Handle Hex Bit Holder - 1/4" x 125mm

Comfortable in the hand and works as it should. Nice, wish felo would make an insulated one.

FROM DIFFICULT TO EASY. THE DIFFERENCE IS THE MAGNET

Although the handle is symmetrical, i find it actually more comfortable to put thumb and forefinger on one side and the other three fingers on the other side of the shaft. There is enough room for that. This is as comfortable as my PB Swiss shorter T handle which is asymmetrical. The magnet is good and strong, but I have been able to use my (dry) fingers to extract slotted, torx, and hex C6 (25mm) bits.

The build quality of this bit driver is excellent. The magnet is very strong. If you have a good amount of standard bits I recommend this.

The exposed metal shaft isn't 5" long, which is what I expected it to be.

This is just a blessing when a bit driver is not enough leverage.

Solid feel and good magnet. Feels really comfortable in the hand. Really wished felo offered this as a dual drive such as wiha does. Sometimes you just need that extra leverage.

This tool is designed well worked great.

There are a lot of T handle drivers out there but this Felo is not only comfortable in hand you have the option of using the 1/4" drive on the short side of the handle. The extra torque means you can remove or tighten screws and bolts to a greater degree than is possible with regular handled screw drivers.
The magnetic bit holder means that you can use any 1/4" bit that you have.
But the very best thing is this Felo has the best price I have found anywhere for similar T-handle drivers.

Solid, comfortable T-Handle. Definitely my Go-To magnetic bit driver.

super strong magnetic tip, ergonomic handle, matte chrome shaft, what's not to like? Keeper for sure.

Very good price and build quality.

Great T-Handle; the magnet is strong and had no problems with any of the bits I normally use. Only downside I did not find the handle as comfortable as I would have hoped but this may be more down to hand size than the item.

I really like these T-Handle drivers. The internal magnet has just the correct amount of holding power. Will be buying the 1/4 square drive socket holder version next .

This is a really great addition to my tool box. Never owned one before. The magnet is just the right strength for holding the bits. Plan on buying another one.

This Felo T-Handle Hex Bit Holder is very comfortable to use and very solid built.
In the future I will also buy their 1/4", 3/8" and 1/2" Socket Holders that have the same type of comfortable handles

This is a great length and very comfortable driver. Good quality and strong magnet. Superb & compact in the ADV bike kit.

Very comfortable handle.

The handle is larger than I expected from the picture, but this is a good thing! The craftsmanship is superb and you can really get a lot of torque out of it. Also, the mat chrome finish is great. Overall, I highly recommend it and I will be getting the square socket drive versions of this!

Very sturdy well built Felo T-handle. Feels very balanced and works perfectly as a socket driver. Magnet is strong but doesn't require linesman to pull bits out. 4 stars because there was a stain in the metal finish out of the box.

Solid construction and a comfortable grip. The magnet is just about right, good grip but not so strong that I need pliers to change a bit. I don't use it everyday, but it comes in handy on the larger and more stubborn fasteners.

Very impressed with the quality and excited to get it

Good magnet and comfortable handle when applying torque.

Really nice tool with sturdy handle - works well / as expected

Very high quality, you wont find a better tool of this type. The handle is part rubber and allows for a really good grip.

Purchased the Felo 32350 Magnetic T-Handle Hex Bit Holder - 1/4" x 5" and could not be more pleased with the feel and performance of this German made tool.

The magnet is a bit strong for really short bits. Otherwise, it's of great quality.

This is a well made T-handle with a comfortable grip, it provies more control and torque than a regular screw driver type handle.

If you're a bicyclist like me , you need to buy this quality t-handle and the Wiha #79256 metric bit selector. You'll have a super-quality set of t-handle metric hex tools in a compact travel size. This setup works every bit as well as a complete set of individual t-handle tools for about 1/4 the price.

I've tried several T handles, this is the best by far. It's comfortable, strong and has the strongest magnet I've ever seen in a bit holder. It will magnetize 2.5" long bits enough to pick up screws, obviously on 1" bits it's even stronger. Seriously, just buy it.

Very nice tool! It's solidly constructed and comfortable to use. The magnet holds bits securely.