Holiday
Tool of the Day™
Essentials
The Holiday Seasonal
New Arrivals
Staff Picks
Sale
Clearance
Wera
Knipex
Hazet
Gedore
Stabila
Stahlwille
Felo
NWS
Heyco
Witte
Bits & Accessories
Cutters & Pincers
Pliers
Ratchets & Sockets
Screwdrivers
Wrenches
Gedore 1.06/HSP1 Hydraulic pressure spindle 10 t
For controlled and safe pulling work
Set up for a pressure of 10 t
The pressure piece can be replaced by a tip and lengthened, as required.
The small pressure spindle is secured with an unscrewing lock to stop any accidental withdrawal
Preparation for use:
Before using, check whether the pressure spindle is screwed far enough out of the cap, so that the pressure pad is in the initial position in the hydraulic cylinder
Unscrew the cap from the spindle body. For this purpose, first slacken off the grub screw.
Screw the spindle body from beneath into the cross piece of the puller until the body protrudes approx. 60 mm from the cross piece.
Screw the cap onto the spindle body until the stop, and then fix it in position by turning in the grub screw.
Use and operation:
Place the puller into position and pre-tension the spindle body using a size 32 mm wrench
Screw the pressure spindle size 12 mm into the cap. The hydraulic effect will come into use. The stroke of the pressure pad in the hydraulic cylinder is max. 12 mm. The workpiece that has been loosened by the hydraulic force may be pulled off completely by turning the spindle body with the cap size 32 mm.
Following its use, the pressure spindle (size 12 mm) is turned back into its initial position
For controlled and safe pulling work
Set up for a pressure of 10 t
The pressure piece can be replaced by a tip and lengthened, as required.
The small pressure spindle is secured with an unscrewing lock to stop any accidental withdrawal
Preparation for use:
Before using, check whether the pressure spindle is screwed far enough out of the cap, so that the pressure pad is in the initial position in the hydraulic cylinder
Unscrew the cap from the spindle body. For this purpose, first slacken off the grub screw.
Screw the spindle body from beneath into the cross piece of the puller until the body protrudes approx. 60 mm from the cross piece.
Screw the cap onto the spindle body until the stop, and then fix it in position by turning in the grub screw.
Use and operation:
Place the puller into position and pre-tension the spindle body using a size 32 mm wrench
Screw the pressure spindle size 12 mm into the cap. The hydraulic effect will come into use. The stroke of the pressure pad in the hydraulic cylinder is max. 12 mm. The workpiece that has been loosened by the hydraulic force may be pulled off completely by turning the spindle body with the cap size 32 mm.
Following its use, the pressure spindle (size 12 mm) is turned back into its initial position
NOTE: The product title and description supersede the image(s) shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.
Gedore Warranty (Abridged)
- GEDORE warrants to Customers who purchase a Product from the GEDORE catalogue, website or an authorized GEDORE dealer for use in their profession that the Product will be free from defects in workmanship and materials. GEDORE brand torque control tools are warranted for twelve (12) months from date of purchase and up to 5,000 torque cycles (whereafter GEDORE recommends re-calibration). Consumable Products are warranted only against defects in workmanship or materials that prevent their use. For purposes of this Warranty, Consumable Products are defined as those Products which are reasonably expected to be used up or damaged during use, including without limitation drill bits, saw and knife blades, grinding and sanding discs, knife blades, files, sensors and batteries. This Warranty extends only to the original Customer and may not be transferred or assigned to any third party.
- GEDORE, at its option, will repair or replace Products due to defects in workmanship or materials, or provide a refund by repaying or crediting Customer with an amount equal to the purchase price of such Products. The repair, replacement or refund of the Products shall be at the election and expense of GEDORE, and shall be Customer's sole and exclusive remedy, in lieu of any and all other rights and remedies which Customer may otherwise have. To obtain Warranty service, Customer shall follow the Return of Product procedures set forth in Paragraph 6 below. GEDORE is not responsible for Products which are lost or damaged during return. It is recommended that Customer: (1) send the returned Product with a tracking or delivery confirmation number; (2) use a carrier offering shipment tracking for all returns; and (3) either insure the Product during shipment or declare the full value of the shipment so that Customer is protected if the Product is lost or damaged during shipment. GEDORE is not liable for the repair, replacement or refund of a Product without valid proof of purchase or delivery.
- The Warranty described above applies only when the Product has been subject to normal use, and does not cover defects or failures resulting from abnormal use, unreasonable use, misuse, abuse, accident, alteration, modification, neglect, lack of maintenance, use after the Product is significantly worn, or when repairs to the Product have been made or attempted by persons other than GEDORE (collectively, 'Abuse'). By repairing, replacing or providing a refund on a Product, GEDORE does not waive a claim that a Product was subject to Abuse.
