Gedore 1 B-012 Combination spanner set 12 pcs 10-32 mm

NOTE: The product title and description supersede the image shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.


List Price: $486.92
(No reviews yet) Write a Review
Stock Status:
Gedore may not be backordered at this time.

Out of stock

0imported on order
Out of stock Gedore products may not be backordered at this time due to supply chain issues.
Gedore 1 B-012 Combination spanner set 12 pieces 10-32 mm
Combination wrench: 10mm
Combination wrench: 11mm
Combination wrench: 12mm
Combination wrench: 13mm
Combination wrench: 14mm
Combination wrench: 17mm
Combination wrench: 19mm
Combination wrench: 22mm
Combination wrench: 24mm
Combination wrench: 27mm
Carefully forged and professional machined
Slim ribbed open end for added strength guarantees maximum torques
The jaws are ground precisely to exact size for optimum contact areas
Ring: 10 degrees offset from shaft, with Unit Drive profile for gentle transmission of force
High bending strength - does not fracture of splinter when overloaded, thus minimizing the risk of injury
Overloading indicated by deformation
Non-glare matte chrome-plated finish
The offset ring ensures a better grip on deep-seated or inset nuts or bolts
Top-grade industrial quality for the hardest of continuous use

Selection of sizes most in use
Acc. to DIN 3113 Form B, ISO 3318, ISO 7738
GEDORE vanadium steel 31CrV3, chrome-plated
With same size each end, ring 10 degrees offset from shaft, with UD profile
Gedore Warranty (Abridged)
  1. GEDORE warrants to Customers who purchase a Product from the GEDORE catalogue, website or an authorized GEDORE dealer for use in their profession that the Product will be free from defects in workmanship and materials. GEDORE brand torque control tools are warranted for twelve (12) months from date of purchase and up to 5,000 torque cycles (whereafter GEDORE recommends re-calibration). Consumable Products are warranted only against defects in workmanship or materials that prevent their use. For purposes of this Warranty, Consumable Products are defined as those Products which are reasonably expected to be used up or damaged during use, including without limitation drill bits, saw and knife blades, grinding and sanding discs, knife blades, files, sensors and batteries. This Warranty extends only to the original Customer and may not be transferred or assigned to any third party.

  2. GEDORE, at its option, will repair or replace Products due to defects in workmanship or materials, or provide a refund by repaying or crediting Customer with an amount equal to the purchase price of such Products. The repair, replacement or refund of the Products shall be at the election and expense of GEDORE, and shall be Customer's sole and exclusive remedy, in lieu of any and all other rights and remedies which Customer may otherwise have. To obtain Warranty service, Customer shall follow the Return of Product procedures set forth in Paragraph 6 below. GEDORE is not responsible for Products which are lost or damaged during return. It is recommended that Customer: (1) send the returned Product with a tracking or delivery confirmation number; (2) use a carrier offering shipment tracking for all returns; and (3) either insure the Product during shipment or declare the full value of the shipment so that Customer is protected if the Product is lost or damaged during shipment. GEDORE is not liable for the repair, replacement or refund of a Product without valid proof of purchase or delivery.

  3. The Warranty described above applies only when the Product has been subject to normal use, and does not cover defects or failures resulting from abnormal use, unreasonable use, misuse, abuse, accident, alteration, modification, neglect, lack of maintenance, use after the Product is significantly worn, or when repairs to the Product have been made or attempted by persons other than GEDORE (collectively, 'Abuse'). By repairing, replacing or providing a refund on a Product, GEDORE does not waive a claim that a Product was subject to Abuse.
Tool Sets
10 mm
11 mm
12 mm
13 mm
14 mm
17 mm
19 mm
22 mm
24 mm
27 mm
Country of Origin:
Made in Germany
Out of Stock