Hazet 163D-12/30 Hammer and Punch Set in Foam Tray, 30 Pieces

(No reviews yet) Write a Review
List Price: $1,108.80
$753.98
32% off!
(No reviews yet) Write a Review
Stock Status:
item out of stock 0 In Stock. Backorderable
Adding to cart… The item has been added
SKU:
HZ163D-12/30
Availability:
0
Shipping:
Free to the lower 48 states at $75+
other US states and territories at $150+
and Canada at $300+
Learn More
Hazet 163D-12/30 Hammer and Punch Set in Foam Tray

Made in Germany
Suitable for Hazet Assistent rolling tool cabinets with a drawer depth of 522 mm
Order system size: 1/2++ (522 x 435 mm)

HAZET Safety-Insert-System (SIS) foam tray
Two-colored soft foam insert clearly shows at a glance where tools are missing
Precisely milled recesses hold every tool in place
Recessed grips for rapid tool removal
Optimum fit and space utilization in tool chests and trolleys
Effective protection against dirt and impact keeps your tools in perfect condition
High-quality, durable polyethylene foam without chemical vapors
Resistant to oil and chemicals and simple to clean: brush under running water – dry – done

Contents:
751HS/5 Parallel Pin Punch Set: 3, 4, 5, 6, 8 mm
2142-2 Club Hammer
2140-50 500g Engineer's Hammer
730-3 Flat Chisel, 18 mm
730-7 Flat Chisel, 25 mm
740-3 Cape Chisel, 6 mm
746-2 Center Punch, 5 mm
748B-2 Drift Pin Punch, 2 mm
748B-3 Drift Pin Punch, 3 mm
748B-4 Drift Pin Punch, 5 mm
748B-6 Drift Pin Punch, 6 mm
748B-8 Drift Pin Punch, 8 mm
824 Gasket Scraper, 23 mm
1953N-40 40 mm Non-rebounding Plastic hammer
1976-2 Magnetic Pickup Tool
1977-2/4 Telescoping Inspection Mirror Set
2147MS Feeler Gauge, 0.05 - 1.0 mm
2152N/3 Low Voltage Continuity Tester, 3 - 48 V
2154N-5 Tape Measure, 5 m
2154-10 Vernier Caliper
NOTE: The product title and description supersede the image(s) shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.
HAZET Warranty
All HAZET products are manufactured in sophisticated, highly specialized factories from the finest materials available, to the highest possible quality standards and are warranted to be free from defects in materials and workmanship.

KC Tool at its discretion will repair or replace HAZET tools with proper proof of purchase that meet the warranty guidelines.

Hazet Warranty Exclusions:
  • Bits
  • Adapters
  • Parts designed to wear (e.g. ratchet internals)
  • Tools with a deformed shape from load abuse or alteration
  • Tools showing signs of "hammering" damage
  • Excessive wear and tear beyond reasonable service life
  • Damage from heat or welding
  • Damage from cutting edges or gripping teeth resulting from use on hardened materials
  • Damage from arcing with hot wires
  • Worn PVC grips and handles
  • Abuse caused from incorrect use or application
  • Country of Origin:
    Made in Germany
    Punchdiameter:
    2.0mm Punch
    Punchdiameter:
    3.0 mm Punch
    Punchdiameter:
    4.0 mm Punch
    Punchdiameter:
    5.0 mm Punch
    Punchdiameter:
    6.0 mm Punch
    Punchdiameter:
    8.0 mm Punch
    Indieset:
    Tool Sets
    Stockstatus:
    Out of Stock
    UPC/EAN:
    4000896245833