KC Tool Aluminum Bench Top Stand for Precision Tools - 50 Holes, Tumbled Finish

KC Tool Aluminum Bench Top Stand for Precision Tools - 50 Holes, Tumbled Finish - KC Tool
NOTE: The product title and description supersede the image shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.

(33 reviews) Write a Review
Stock Status:
item in stock In Stock
Adding to cart… The item has been added

Precision Screwdriver Stand

Manufactured here in Olathe, KS.

Made out of 6061 Aluminum, tumbled finish, 3/8" thick.

Top plate: 9.7" x 5.0" (246mm x 127mm)
Overall height: 4.4" (112mm)
Weight: 3.20 lbs

Holds up to 50 precision screwdrivers

Wiha standard & ESD precision screwdrivers: blade lengths up to 80mm
Wiha PicoFinish precision screwdrivers: blade lengths up to 100mm
Witte Wittron precision screwdrivers: all blade lengths (up to 80mm)
Gedore precision screwdrivers: all blade lengths (up to 100mm)

Lifetime warranty
Individual Tools
Country of Origin:
Made in USA
In Stock

33 Reviews

  • 5
    Wiha Holder

    Posted by Cale on May 16th 2021

    This stand works great for the Wiha precision screwdriver sets that come in a quantity of 50.

  • 4
    Nice bench top stand

    Posted by Iain White on May 10th 2021

    Nice item. Mine is also slightly warped but I can file a little off the feet or glue a thin pad on the feet to even it out. I did a couple of modifications: (a) I reamed out 2 holes in the back row to allow a Wiha 6mm nut driver to fit (b) I counter bored the 4 holes used to attach the sides so the the hex bolt sits flush with the top.

  • 5
    Nice stand!

    Posted by Unknown on May 2nd 2021

    Really nice stand for screwdrivers. Keeps them organized and accessible!

  • 5

    Posted by George King on Apr 3rd 2021

    Nicely finished, works well for wiha drivers and tweezers too.

  • 5
    KC Tool screwdriver stand

    Posted by Tom H on Jan 10th 2021

    Very well made and designed. Holds all my Wiha electronic screwdrivers and pico finish drivers also. The magnets are nice for holding bits. Great product.

  • 5
    benchtop tool holder

    Posted by bill p on Jan 2nd 2021

    damn. i was expecting some lightweight stand for tools. i was a little dismayed when i picked up the package. once i opened it up and pulled out the stand i was very impressed. very sturdy. rock solid. seems pretty level (slight turn on table evens out the supports so i guess the table isn't very level) and holds most of the wera metric nut driver set (the 6.0 mm doesn't quite fit). due to the minimal thickness used for the top plate it would be difficult to countersink the hex bolts. adding plate thickness for this adjustment does not make sense. a great product, well executed. very much worthy of your benchtop.

  • 4
    Great Stand and Magnets

    Posted by Michael Maciazka on Dec 6th 2020

    I just received this product (and added the magnet set to go with it) so I haven't had a chance to really try it out, but I got it put together. The fit and finish are really good. My only two complaints (which really don't matter to me...but may matter to others hence the 4 stars) are that I wish the stand had a better finish on it. The legs don't look the best where as the top is finished pretty nicely. Second, the magnets holes don't line up exactly with the stand (they're drilled large enough to make it work but center to center of the magnets are about 2mm less than the stand). Everything fits together and once bolted together, it's great. The machining is very well done and the countersunk holes are perfect. The logo looks great. Overall I love it and I think the quality is very good and value is also very good. I may modify mine slightly by counter boring the top for the bolts. I am also thinking about painting mine in a matte color.

  • 1
    Warped product

    Posted by Cody on Jun 21st 2020

    I purchased this item to hold my precision screwdrivers that I use everyday for electronics repair. I am a 100% disabled combat veteran that repairs small electronics devices to supplement the income I receive from disability. I was super excited to receive this product and after assembling it, I was ecstatic with the quality. One problem though.. the top plate with the holes in it is slightly warped so that it will not sit flat on any surface. I tried it on multiple surfaces just to make sure, then I flipped it completely over laying it flat on its top, where I found it to have a very pronounced warp in it. I'm not sure how this would happen on a machined surface (i guess?!?) but is definitely warped. I contacted customer service about a replacement, and to their credit they offered to send me a replacement after I sent the one I have back for them to check and verify. I don't have time to deal with returning products, then having to wait weeks to receive a replacement, so I'll just try to fix it myself. With all this Covid19 mess it took me long enough to get it in the first place. So needless to say, I spend $50+ on something that I can't use to its full potential. You may not think it is a big deal, but when I pay for something I expect to receive what I pay for in the proper condition. Hopefully, my review will not be trashed since it is not positive.

  • 4
    Great tool stand

    Posted by JR on Jun 5th 2020

    This stand fits a number of small tools in addition to screwdrivers. I'm using it for screwdrivers and ESD tweezers. It works best with screwdrivers that have a flat end where the shaft meets the handle. Otherwise, the screwdriver will tip over slightly. My only suggestion is an option for anodizing or powdercoating.