Stahlwille 416QR Flexible Joint Fine Tooth Ratchet, 1/4" Drive

NOTE: The product title and description supersede the image shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.


List Price: $216.00
Stock Status:
item in stock 1 In Stock. Ships by
Adding to cart… The item has been added
Stahlwille 416QR Flexible Joint Fine Tooth Ratchet, 1/4" Drive
Fine tooth with 80 teeth
With QuickRelease safety
Re-engages after movement of 4.5 degrees
Construction without screws prevents foreign object damage
Non-slip 2 component handle
Handle may be raised or lowered by approx. 90 deg
Lockable in the following positions: straight, 30 degree up, 60 degree up, 30 degree down
Unlocked by depressing button in handle
Material: Chrome-Vanadium Steel
Stahlwille Tools purchased through KC Tool come with a lifetime warranty against material defects or faulty workmanship except for consumable items such as screwdriver bits and socket adapters. Stahlwille torque products are subject to a separate warranty that has guidelines and regulations on repair labs that have been authorized by Stahlwille to perform service and calibration. The warranty for both torque and non-torque products is void if the tool is tampered with, abused, or used in a manner that is not intended by the manufacturer (i.e. using chrome sockets on an impact gun).

Return tools for warranty replacement directly to KC Tool. All returns are subject to inspection prior to replacement.
1/4 Inch Square Drive
Chrome-plated Finish
150-174mm (6.0-6.9 inches)
Individual Tools
Country of Origin:
Made in Germany
In Stock

2 Reviews Write a Review

  • 1
    1/4" ratchet

    Posted by Paul Morrison on Mar 18th 2022

    Ratchet is comfortable. Head works great. The locking mechanism sucks. The button falls out constantly. Save your money. I do not recommend.

  • 1

    Posted by Victor L Vanetten on Mar 5th 2020

    Don't waste your time buy a straight handle version joint on flex is big and clumsy very loose and floppy in the head have to push lock release well below flush point to release lock and it still drags and the pin that holds the head into the handle falling out push it right out with you finger so much for foreign object deterrence expected way better quality than this and the 3/8 version has the same pin issue bought both together first time stahlwille purchase here usually buy hazet or gedore I'll stick to those two brands after this not impressed but a hazet hp90 ratchet that's what I did to solve this problem