Overall length / OAL: 218 mm (8.6")
For torque controlled fastening of cable plug connectors with Hex heads.
Used with Wiha TorqueControl Screwdrivers:28504 - 7.5 - 20 in-lbs Adjustable Torque Screwdriver
28552 - 0.8 - 2.0 Nm Adjustable Torque Screwdriver
28526 - 7.5 - 20 in-lbs ESD Adjustable Torque Screwdriver
Most people just hand-tighten their coax cables, let alone actually use a torque wrench to get the perfect torque. If you want to "do it right", Wiha now makes a series of Cable Keys for use with our standard Torque Screwdrivers, designed specifically to prevent over-tightening of all sizes of HEX cable connectors.
Over-torquing can possibly crush the insulation, as well as the center contacts and ground mating surfaces. Any change to those can alter the impedance and increase the VSWR. Under-torquing can be just as bad if an air-gap is left in the insulator, or the center pin or ground mating surface isn't fully engaged. This becomes a more significant problem with higher Gigahertz."
Wiha Tools No Hassle GuaranteePlease note: KC Tool is no longer a dealer of Wiha Tools. If the tool in question was purchased from us we will do our best to find a replacement. Otherwise please contact Wiha Tools directly.
Wiha branded tools are regarded as the most durable, best designed and highly innovative products around. Our tools are used by demanding professional tradespeople and tool aficionados alike. They are meant to be used and utilized often. However, if you are not happy for any reason return them within 12 months of purchase with proof of purchase and Wiha will Repair or Replace. Rest assured, if for some reason there is a defect in material or workmanship Wiha will replace your tool free of charge for as long as you own the tool.
Failures due to misuse, abuse or normal wear and tear are not covered by this guarantee. We stand by our products with what we believe is the best No Hassle Guarantee in the industry.
Wiha Tools has the right to exclude bits, Tweezers and Ceramic Screwdrivers. These products are either consumable or wear easily. All torque tools are designed to be re-calibrated after 5,000 cycles or 1 year (whichever comes first).
Some areas do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This guarantee gives you specific rights, and you may also have other rights, which vary, from state to state, province to province, or country to country.
This No Hassle Guarantee is the sole and exclusive guarantee for the Willi Hahn Corporation dba Wiha Tools. No employee, agent, dealer, or other person is authorized to alter this guarantee or make any other guarantees on behalf of Wiha Tools.