Gedore SB 8551 TGZ-1 Tap Wrench with Ratchet and Eyelet, Size 1, M3-M10

NOTE: The product title and description supersede the image shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.


List Price: $32.27
Stock Status:
item in stock 4 In Stock. Not backorderable.
Adding to cart… The item has been added
Gedore SB 8551 TGZ-1 Tap Wrench with Ratchet and Eyelet, Size 1, M3-M10
With countersunk eyelet for easier alignment of the taps/screw extractor
To operate screw extractors in hard to access areas
Reversible for clockwise or counter-clockwise operation
Sliding T-handle
With two-jaw chuck to hold square shanks

Gedore Warranty (Abridged)
  1. GEDORE warrants to Customers who purchase a Product from the GEDORE catalogue, website or an authorized GEDORE dealer for use in their profession that the Product will be free from defects in workmanship and materials. GEDORE brand torque control tools are warranted for twelve (12) months from date of purchase and up to 5,000 torque cycles (whereafter GEDORE recommends re-calibration). Consumable Products are warranted only against defects in workmanship or materials that prevent their use. For purposes of this Warranty, Consumable Products are defined as those Products which are reasonably expected to be used up or damaged during use, including without limitation drill bits, saw and knife blades, grinding and sanding discs, knife blades, files, sensors and batteries. This Warranty extends only to the original Customer and may not be transferred or assigned to any third party.

  2. GEDORE, at its option, will repair or replace Products due to defects in workmanship or materials, or provide a refund by repaying or crediting Customer with an amount equal to the purchase price of such Products. The repair, replacement or refund of the Products shall be at the election and expense of GEDORE, and shall be Customer's sole and exclusive remedy, in lieu of any and all other rights and remedies which Customer may otherwise have. To obtain Warranty service, Customer shall follow the Return of Product procedures set forth in Paragraph 6 below. GEDORE is not responsible for Products which are lost or damaged during return. It is recommended that Customer: (1) send the returned Product with a tracking or delivery confirmation number; (2) use a carrier offering shipment tracking for all returns; and (3) either insure the Product during shipment or declare the full value of the shipment so that Customer is protected if the Product is lost or damaged during shipment. GEDORE is not liable for the repair, replacement or refund of a Product without valid proof of purchase or delivery.

  3. The Warranty described above applies only when the Product has been subject to normal use, and does not cover defects or failures resulting from abnormal use, unreasonable use, misuse, abuse, accident, alteration, modification, neglect, lack of maintenance, use after the Product is significantly worn, or when repairs to the Product have been made or attempted by persons other than GEDORE (collectively, 'Abuse'). By repairing, replacing or providing a refund on a Product, GEDORE does not waive a claim that a Product was subject to Abuse.
75-99mm (3.0-3.9 inches)
Individual Tools
Country of Origin:
Made in Germany
In Stock

5 Reviews Write a Review

  • 5
    George TGZ-1 ratchet tool.

    Posted by Al on Mar 7th 2021

    Pretty unique little tool. Have a bazillion little bits, taps and various drivers this can be used for. Will mostly be used for electrical restores and refits.

  • 5
    works well

    Posted by TIM on Dec 12th 2020

    Finally, Gedore fixed whatever packaging issues, because I finally got an actual TGZ-1 with packaging labeled as TGZ-1. Fits size 1 extractor, like it should, and works well. Like the Gedore version cause of the bubble level, a novelty, but works.

  • 5
    Gedore SB 8551 TGZ Tap Wrench

    Posted by Richard Green on Dec 9th 2020

    The level on the end really aids with tap alignment , making starting the tap correctly extremely accurate. Great feature ,great price.

  • 1
    something strange with sizing

    Posted by TIM on Jun 26th 2020

    After getting two replacements of the TGZ-1, there is something amiss with Gedore's quality control on sizing and package labeling. M3-M10 should mean it fits Size 1 extractor, but it does not because the two I received would not go down that far. They were the same size as TGZ-2. I like them, but not all the same size when I needed for size 1 extractor.

  • 2
    Didnt like it as much as I thought I would

    Posted by Jason Dennis on May 22nd 2020

    It needs a fine tooth ratchet. The ratchet mechanism only has 6 clicks per revolution meaning you have to turn it 60 degrees per click. Its awkward. The bubble doesn't really help like I thought it would, probably because you have to turn it 60 degrees and reposition. And by grabbing the very end of the tap, it just gives you more length and leverage and makes it easier to break a tap. The tap should slide up in the body like a tapping collet. The finish isn't very good with sharp edges that look like it was assembled with a hammer and vise grips. This is my first Gedore product and I don't know if I will buy anything else.