Tool of the Day™
Essentials
The Seasonal
New Arrivals
Staff Picks
Sale
Clearance
Wera
Knipex
Hazet
Gedore
Stabila
Stahlwille
Felo
NWS
Heyco
Witte
Bits & Accessories
Cutters & Pincers
Pliers
Ratchets & Sockets
Screwdrivers
Wrenches
Hazet 7290-2STAC 3/8" Electronic Torque Wrench with Built-in Angle Gauge, 9 x 12 mm, 5 - 60 mm (3.5 - 44 lbs-ft)
Application:
For high-precision screw connections with torque / rotation angle calling for high accuracy or mandatory documentation, e.g. engine components (especially cylinder head bolts), machine construction with increased requirements (including robot technology, etc.)
Includes HZ6402-1 3/8" reversible ratchet insert
Length with/without insert tool: 347 mm / 302 mm
USB-C interface for programming torque wrenches with built-in angle gauge and documenting the torque data via laptop and PC with the software SmartTAC tool 7910-sTAC.
IP 40 rated protection with a splash-proof display and membrane keyboard
USB-C port to directly charge battery
Includes commercially replaceable 14650 / 3.7 V Li-ion battery and 1 metre USB 3.1 / A-C charging/data cable
Functions:
Large, high-contrast illuminated, easily readable OLED display, dimmable and 180° rotatable
Indication of the measuring values in 13 mm font size, including a rating of the fastener joint (OK / not OK)
Display deviation in right and left torque: from +/-1% / +/-1 digit
Display deviation in right and left rotation angle: +/-1% / +/-1°
Rotation angle range adding: 0 to 999°
Torque accuracy for OK display (green): adjustable +/-1 to 10%
Rotation angle accuracy for OK display (green): adjustable 1 to 90°
Adjustable torque units: Nm, lbf ft, lbf in or kgf m
Effective length is adjustable / programmable for other insert tools from 0 to 250 m (required for correct torque / rotation angle measurements for non-standard length insert tools)
Fourfold signalling of the torque process by audible alarm (buzzer), vibration signal, synchronous numerical display, and a 360° LED display with "traffic light function" that is visible from all around
Threshold value, pre-warning level: adjustable 50 to 99%
Adjustable signaling, On/Off audible signal (buzzer) and vibration
Reset function restores to factory settings
Stand-by time: adjustable 1 to 10 minutes
Indication of battery condition and memory
Memory capacity, including date and time: up to 3000 measurements
Flow charts and sets of parameters can be progammed: 25 and 25
2 control functions: programmable torque control for angle tightening and angle control for torque tightening
Menu block function against unauthorised adjustment, four-digit code is personally selected
Display of the software version with serial numbers, calibration date and service display / usage counter
Menu languages: German, English, French, Italian, Chinese
Programming and evaluation software for laptop and PC 7910-sTAC (at additional cost)
Application:
For high-precision screw connections with torque / rotation angle calling for high accuracy or mandatory documentation, e.g. engine components (especially cylinder head bolts), machine construction with increased requirements (including robot technology, etc.)
Includes HZ6402-1 3/8" reversible ratchet insert
Length with/without insert tool: 347 mm / 302 mm
USB-C interface for programming torque wrenches with built-in angle gauge and documenting the torque data via laptop and PC with the software SmartTAC tool 7910-sTAC.
IP 40 rated protection with a splash-proof display and membrane keyboard
USB-C port to directly charge battery
Includes commercially replaceable 14650 / 3.7 V Li-ion battery and 1 metre USB 3.1 / A-C charging/data cable
Functions:
Large, high-contrast illuminated, easily readable OLED display, dimmable and 180° rotatable
Indication of the measuring values in 13 mm font size, including a rating of the fastener joint (OK / not OK)
Display deviation in right and left torque: from +/-1% / +/-1 digit
Display deviation in right and left rotation angle: +/-1% / +/-1°
Rotation angle range adding: 0 to 999°
Torque accuracy for OK display (green): adjustable +/-1 to 10%
Rotation angle accuracy for OK display (green): adjustable 1 to 90°
Adjustable torque units: Nm, lbf ft, lbf in or kgf m
Effective length is adjustable / programmable for other insert tools from 0 to 250 m (required for correct torque / rotation angle measurements for non-standard length insert tools)
Fourfold signalling of the torque process by audible alarm (buzzer), vibration signal, synchronous numerical display, and a 360° LED display with "traffic light function" that is visible from all around
Threshold value, pre-warning level: adjustable 50 to 99%
Adjustable signaling, On/Off audible signal (buzzer) and vibration
Reset function restores to factory settings
Stand-by time: adjustable 1 to 10 minutes
Indication of battery condition and memory
Memory capacity, including date and time: up to 3000 measurements
Flow charts and sets of parameters can be progammed: 25 and 25
2 control functions: programmable torque control for angle tightening and angle control for torque tightening
Menu block function against unauthorised adjustment, four-digit code is personally selected
Display of the software version with serial numbers, calibration date and service display / usage counter
Menu languages: German, English, French, Italian, Chinese
Programming and evaluation software for laptop and PC 7910-sTAC (at additional cost)
NOTE: The product title and description supersede the image(s) shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.
HAZET Warranty
All HAZET products are manufactured in sophisticated, highly specialized factories from the finest materials available, to the highest possible quality standards and are warranted to be free from defects in materials and workmanship.
KC Tool at its discretion will repair or replace HAZET tools with proper proof of purchase that meet the warranty guidelines.
Hazet Warranty Exclusions:
Bits Adapters Parts designed to wear (e.g. ratchet internals) Tools with a deformed shape from load abuse or alteration Tools showing signs of "hammering" damage Excessive wear and tear beyond reasonable service life Damage from heat or welding Damage from cutting edges or gripping teeth resulting from use on hardened materials Damage from arcing with hot wires Worn PVC grips and handles Abuse caused from incorrect use or application
All HAZET products are manufactured in sophisticated, highly specialized factories from the finest materials available, to the highest possible quality standards and are warranted to be free from defects in materials and workmanship.
KC Tool at its discretion will repair or replace HAZET tools with proper proof of purchase that meet the warranty guidelines.
Hazet Warranty Exclusions:
