Tool of the Day™
Essentials
The Seasonal
New Arrivals
Staff Picks
Sale
Clearance
Wera
Knipex
Hazet
Gedore
Stabila
Stahlwille
Felo
NWS
Heyco
Witte
Bits & Accessories
Cutters & Pincers
Pliers
Ratchets & Sockets
Screwdrivers
Wrenches
Hazet 7295-5STAC 3/4" Electronic Torque Wrench with Built-in Angle Gauge, 14 x 18 mm insert, 65 - 650 Nm (48 - 480 lbs-ft)
Includes HZ6406 3/4" reversible ratchet 14 x 18 insert
IP 40 splash-proof display and membrane keyboard
Includes commercially replaceable 14650 Li-ion battery and 1 m USB-C charge cable
Functions:
Large, high-contrast illuminated, easily readable OLED display, dimmable and 180° rotatable
Indication of the measuring values in 13 mm font size, including a rating of the screw-joint (OK / not OK)
Display deviation in right and left torque: from +/-1% / +/-1 digit
Display deviation in right and left rotation angle: +/-1% / +/-1°
Rotation angle range adding: 0 to 999°
Torque accuracy for OK display (green): adjustable +/-1 to 10%
Rotation angle accuracy for OK display (green): adjustable 1 to 90°
Adjustable torque units: Nm, lbf ft, lbf in or kgf m
Effective length is adjustable / programmable for other insert tools from 0 to 250 m (required for correct torque / rotation angle measurements with non-standard length inserts)
Fourfold signalling of the screwing process by audible alarm (buzzer), vibration signal, synchronous numerical display, and a 360° LED display with "traffic light function" that is visible from all around
Threshold value, pre-warning level: adjustable 50 to 99%
Adjustable signaling, On/Off audible signal (buzzer) and vibration
Reset function restores unit to factory settings
Stand-by time: adjustable 1 to 10 minutes
Indication of battery condition and memory
Memory capacity, including date and time: up to 3000 measurements
Offers possibility to program flow charts and sets of parameters: 25 and 25
2 control functions: programmable torque control for angle tightening and angle control for torque tightening
Menu block function against unauthorised adjustment, four-digit code is personally selected
Display of the software version with serial numbers, calibration date and service display / usage counter
Menu languages: German, English, French, Italian, Chinese
Programming and evaluation software for laptop and PC 7910-sTAC (at additional cost)
Can be connected to a laptop or PC via USB-C port and to the optional programming and evaluation software.
Includes HZ6406 3/4" reversible ratchet 14 x 18 insert
IP 40 splash-proof display and membrane keyboard
Includes commercially replaceable 14650 Li-ion battery and 1 m USB-C charge cable
Functions:
Large, high-contrast illuminated, easily readable OLED display, dimmable and 180° rotatable
Indication of the measuring values in 13 mm font size, including a rating of the screw-joint (OK / not OK)
Display deviation in right and left torque: from +/-1% / +/-1 digit
Display deviation in right and left rotation angle: +/-1% / +/-1°
Rotation angle range adding: 0 to 999°
Torque accuracy for OK display (green): adjustable +/-1 to 10%
Rotation angle accuracy for OK display (green): adjustable 1 to 90°
Adjustable torque units: Nm, lbf ft, lbf in or kgf m
Effective length is adjustable / programmable for other insert tools from 0 to 250 m (required for correct torque / rotation angle measurements with non-standard length inserts)
Fourfold signalling of the screwing process by audible alarm (buzzer), vibration signal, synchronous numerical display, and a 360° LED display with "traffic light function" that is visible from all around
Threshold value, pre-warning level: adjustable 50 to 99%
Adjustable signaling, On/Off audible signal (buzzer) and vibration
Reset function restores unit to factory settings
Stand-by time: adjustable 1 to 10 minutes
Indication of battery condition and memory
Memory capacity, including date and time: up to 3000 measurements
Offers possibility to program flow charts and sets of parameters: 25 and 25
2 control functions: programmable torque control for angle tightening and angle control for torque tightening
Menu block function against unauthorised adjustment, four-digit code is personally selected
Display of the software version with serial numbers, calibration date and service display / usage counter
Menu languages: German, English, French, Italian, Chinese
Programming and evaluation software for laptop and PC 7910-sTAC (at additional cost)
Can be connected to a laptop or PC via USB-C port and to the optional programming and evaluation software.
NOTE: The product title and description supersede the image(s) shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.
HAZET Warranty
All HAZET products are manufactured in sophisticated, highly specialized factories from the finest materials available, to the highest possible quality standards and are warranted to be free from defects in materials and workmanship.
KC Tool at its discretion will repair or replace HAZET tools with proper proof of purchase that meet the warranty guidelines.
Hazet Warranty Exclusions:
Bits Adapters Parts designed to wear (e.g. ratchet internals) Tools with a deformed shape from load abuse or alteration Tools showing signs of "hammering" damage Excessive wear and tear beyond reasonable service life Damage from heat or welding Damage from cutting edges or gripping teeth resulting from use on hardened materials Damage from arcing with hot wires Worn PVC grips and handles Abuse caused from incorrect use or application
All HAZET products are manufactured in sophisticated, highly specialized factories from the finest materials available, to the highest possible quality standards and are warranted to be free from defects in materials and workmanship.
KC Tool at its discretion will repair or replace HAZET tools with proper proof of purchase that meet the warranty guidelines.
Hazet Warranty Exclusions:
