Measuring accuracy of the vials in vial up or vial down position 0.029 degrees = 1/32in over 72 inches / 0.5mm/m
Electronic accuracy: At 0 degrees and 90 degrees = +/- 0.05 degrees, from 1 degree to 89 degrees = +/- 0.2 degrees
IP65 dust and water proof
Recalibration of the electronic module is simple and fast with the Stabila vial system
Degree, % , rise and run in both inch and metric. Display decimal or fractional Find plumb and level with Sound. Hear/listen for Spot On as you are making adjustments to the work with shims etc.
Displays on the side and top light up and are easily viewed from any position
Rib reinforced frame protects the precision vial system and electronic package
Impact resistant removable endcaps protect the frame
Includes padded carrying case
Uses 2-AA batteries
Measure, set or duplicate any slope or angle on the work site. Precise slope measurements as needed for ADA 4.8.2 handicap ramp compliance. Reads in the same scale as your prints. Instantly converts measurements to any scale. Rise & run to degrees, degrees to percent, etc.
Measurement accuracy in normal position: +/- 1/32in @ 72in
Measurement accuracy in reverse position: +/- 1/32in @ 72in
Accuracy with electronic inclination measurement at 0 and 90 degrees: +/-0.05 deg
Accuracy with electronic inclination measurement at 1 to 89 degrees: +/-0.20 deg
Measuring modes: degree, %, mm/m, inch/ft
Number of measuring surfaces: 2
End caps: Removable / Wall Grips / Shock Absorbing
Profile: Rectangular profile with ribs
Protection class: IP 65
Battery type: AA
Warranty Overview for the United States and Canada.
STABILA spirit levels will maintain their stated accuracy for life. The fixed vials on all STABILA levels will not fog, leak, or become inaccurate. If they do, you will be given a new level.
Vials that are melted due to excessive heat (example: welding) are not covered under the warranty policy. Bent or damaged frames void warranty.
Laser and Tech (Electronic) Levels
We will repair, without charge, any defects due to faulty materials or workmanship for two years from the date of purchase. Must have copy of receipt for after sale service.
Accessories: Tape Measures, Tripods, Cases, Grade Rods, Etc.
30 Day Warranty against manufacturer defects from the date of purchase.
Moving Parts, I.E. protractor vials, and the extending portion of Plate and XtL levels are not covered under the lifetime guarantee.
Levels with an extension arm that are used on a daily basis require annual user maintenance. We offer an easy to install "maintenance kit" (part #33000) available through your local Stabila dealer that provides all of the slide bearings, lock parts, a new tension spring, wrenches and instructions to renew your slide assembly in less than five minutes.