Wera 1460 Kraftform Micro ESD Pre-Set Torque Screwdriver with quick-release chuck, factory set: 0.035 Nm (3.5 Ncm, or 0.026 ft-lbs.) +/- 10%
Other pre-set values within the adjustable range can be delivered on request (0.02 - 0.06 Nm)
Tip size: 4mm Halfmoon or HIOS bit holder (NOT compatible with standard 1/4" drill bits)
Overall length: 133mm
Suitable for bits with 4mm halfmoon drive (Wera Series 9) and bits with 4mm HIOS drive (Wera Series 21)
The electric surface resistance of the Wera ESD material is < 109 Ohm.
Torque screwdriver with pre-set torque value of 3.5 cNm (accuracy +/- 10%) """ the torque recommended by leading smart phone manufacturers.
It is ideal for the torque-controlled tightening of screws on components subject to damage from electrostatic energy.
Distinctly audible and noticeable excess load signal when the pre-set value is exceeded.
Unlimited torque for manual loosening jobs.
Kraftform Micro handle with swivel cap and fast-turning zone for rapid twisting. This makes time-consuming grip adjustments no longer necessary.
The power zone with integrated soft cushion material ensures high torque transfer for loosening or tightening screws.
The precision zone directly above the blade facilitates a correct rotation angle for fine adjustment jobs.
Manufacturer Part #: 05074800001
Other pre-set values within the adjustable range can be delivered on request (0.02 - 0.06 Nm)
Tip size: 4mm Halfmoon or HIOS bit holder (NOT compatible with standard 1/4" drill bits)
Overall length: 133mm
Suitable for bits with 4mm halfmoon drive (Wera Series 9) and bits with 4mm HIOS drive (Wera Series 21)
The electric surface resistance of the Wera ESD material is < 109 Ohm.
Torque screwdriver with pre-set torque value of 3.5 cNm (accuracy +/- 10%) """ the torque recommended by leading smart phone manufacturers.
It is ideal for the torque-controlled tightening of screws on components subject to damage from electrostatic energy.
Distinctly audible and noticeable excess load signal when the pre-set value is exceeded.
Unlimited torque for manual loosening jobs.
Kraftform Micro handle with swivel cap and fast-turning zone for rapid twisting. This makes time-consuming grip adjustments no longer necessary.
The power zone with integrated soft cushion material ensures high torque transfer for loosening or tightening screws.
The precision zone directly above the blade facilitates a correct rotation angle for fine adjustment jobs.
Manufacturer Part #: 05074800001
All Wera professional hand tools are covered by a lifetime warranty against breakage due to defects in materials or workmanship for the normal life of the product. This policy does not cover products which have been altered in any way, and products which have been subject to abuse, misuse, negligence, or improper storage. Bits, bitholders and L-keys are also not covered under this warranty policy as they are considered consumable. Wera Tools reserves the right to inspect warranty claims before replacements are issued. Return transportation costs are not included, however Wera will send replacement tools at no cost. Any claims for reasons other than those noted here must be approved by Wera Tools Inc., or its authorized representatives.
Return tools for warranty replacement directly to KC Tool. All returns are subject to inspection prior to replacement.
Return tools for warranty replacement directly to KC Tool. All returns are subject to inspection prior to replacement.
