Wera 347903 Stainless Steel Slotted/Phillips/Square Screwdriver Set

NOTE: The product title and description supersede the image shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.

Wera

List Price: $125.26
$90.61
(10 reviews)
Stock Status:
item out of stock 0 In Stock. Backorderable
Adding to cart… The item has been added
SKU:
WR347903
Availability:
0
Wera Stainless 3334 Lasertip Slotted/Phillips/Square Screwdriver Set - 12 Pieces
Slotted: 0.5 x 3.0 x 80mm*
Slotted: 0.6 x 3.5 x 100mm*
Slotted: 0.8 x 4.0 x 100mm
Slotted: 1.0 x 5.5 x 125mm
Slotted: 1.2 x 6.5 x 150mm
Slotted: 1.2 x 8.0 x 175mm
Phillips: #0 x 60mm
Phillips: #1 x 80mm
Phillips: #2 x 100mm
Phillips: #3 x 150mm
Square: #1 x 80mm*
Square: #2 x 100mm*
* Without Lasertip

Wera's stainless steel is vacuum ice-hardened, giving them the hardness and strength necessary for any industrial application.
Stainless steel looks great when it's done right.
Sometimes people forget to use stainless tools to install the screws, and particles are left behind causing what's known as extraneous rust.
Multi-component Kraftform handle with hard and soft zones, fits the shape to the hand for the ultimate in comfort and high speed torque transfer.
The end of the handle is labeled to quickly identify different sizes.
The handle is also built so that the screwdriver won't roll away on a graded surface.
The Lasertip is designed to "bite" into the screws, helping prevent unwanted cam-out.

Manufacturer Part #: 05347903001

All Wera professional hand tools are covered by a lifetime warranty against breakage due to defects in materials or workmanship for the normal life of the product. This policy does not cover products which have been altered in any way, and products which have been subject to abuse, misuse, negligence, or improper storage. Bits, bitholders and L-keys are also not covered under this warranty policy as they are considered consumable. Wera Tools reserves the right to inspect warranty claims before replacements are issued. Return transportation costs are not included, however Wera will send replacement tools at no cost. Any claims for reasons other than those noted here must be approved by Wera Tools Inc. All returns are subject to inspection prior to replacement.

All Wera tools must be sent to Wera for warranty claims. Use the following link to start this process.
Submit warranty claim here
Tipstyle:
Slotted
Tipstyle:
Phillips
Tipstyle:
Square
Tipsize:
Phillips #0
Tipsize:
Phillips #1
Tipsize:
Phillips #2
Tipsize:
Phillips #3
Tipsize:
Square #1
Tipsize:
Square #2
Handlematerial:
Multi-Component Material
Indieset:
Tool Sets
Finish:
Stainless Steel Finish
Tipsize:
Slotted 6.5 mm
Tipsize:
Slotted 8.0 mm
Tipsize:
Slotted 3.0 mm (1/8 in.)
Tipsize:
Slotted 3.5 mm (9/64 in.)
Tipsize:
Slotted 4.0 mm (5/32 in.)
Tipsize:
Slotted 5.5 mm
Features:
Anti Cam Out
Country of Origin:
Made in Czech Republic
Stockstatus:
Out of Stock
UPC/EAN:
4013288139238

10 Reviews Write a Review

  • 5
    Recommended highly for Industry and Plumbing

    Posted by Arrian LeClaire on Mar 26th 2017

    I work in humid or wet conditions most of the time and my tools end up rusting prematurely, even with weekly coatings of oil and the usage of desiccants in my toolbox. So far these are holding up well under those conditions, but time will tell. Stainless steel also tends to be softer than tool steel, but so far I haven't run into any issues. For anyone who appreciates the standard Kraftform drivers, but need the ability to hold up under extreme conditions or work with stainless fasteners these should be an instant buy. My only real complaint is the lack of a Stainless Square #3 driver, though I infrequently run into them.

!