Witte Pro Impact Phillips Screwdriver, #1 x 85mm

Witte 83901 PRO Impact Phillips Screwdriver, #1 x 85mm - KC Tool
NOTE: The product title and description supersede the image shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.

Witte

List Price: $11.39
$9.68
(1 review)
Stock Status:
item in stock 6 In Stock.
Adding to cart… The item has been added
SKU:
WT83901
Availability:
1
Witte Pro Impact Phillips Screwdriver with hexagon bolster - 83900 Series

Tip size: Phillips #1
Blade length: 85mm (3.5")
Overall length: 190mm

Pro Impact

With impact cap for use under extreme conditions

The Pro Impact is characterized by a solid impact cap at the end of the handle as part of the drive through hexagon bolster blade. Extremely tight screws can be loosened with a hammer blow on the impact cap. The impact energy is transmitted through the cap and blade directly to the screw head. Neither the handle nor the blade will be damaged.

With impact cap
Soft component
Anti-roll prevention
Multifunctional zone
Hexagon bolster
Matte chromium plated blade from high alloy special steel
Black blade tip for an optimal precision
Permanently marked blades
WITTE Tools offers a Lifetime Warranty. The Lifetime Warranty does not cover damages from misuse, abuse, accidents, lack of maintenance, or normal wear and tear. WITTE insert bits, bitholders and L-keys are not included in this warranty policy. We will repair or replace any tool that is classified as defective in material or workmanship. If your tool is no longer available, WITTE Tools may elect a replacement with a comparable tool of equal specification.

Return tools for warranty replacement directly to KC Tool. All returns are subject to inspection prior to replacement.
Tipstyle:
Phillips
Handlematerial:
Multi-Component Material
Indieset:
Individual Tools
Finish:
Black Finish
Tipsize:
Phillips #1
Bladelength:
80 mm (3.1 Inches)
OAL:
175-199mm (7.0-7.9 inches)
Country of Origin:
Made in Germany
Stockstatus:
In Stock
UPC/EAN:
4003955244693

1 Review Write a Review

  • 2
    Maybe I got a bad one....

    Posted by Ryan Guldbrandsen on Apr 23rd 2023

    First off these are very nice drivers. I bought a full set. #1,2,3 and 3 of the same size slotted drivers. These are very comfortable in hand and have 99.9% of what I want in a screw driver. BUT, I finally used one. This #1 Phillips. I simply tightened 4 screws on my isobar surge protector(the screws are in-between #1 and #2 unfortunately). So first issue. The driver kept wanting to slip out. That sucked... Second issue, upon inspecting the driver. It was damaged from slipping out! This was a very low torque application! So either the chinesium screws are so good on the isobar that they will damage any driver. Which I found isn't the case using Weras, vessels, and PB swiss to loosen and retighten using a #1. So, the steel used in the head of my driver is soft. Which means I'm not going to be able to trust the total set I purchased to do the around the house work I purchased them for. There's ABSOLUTELY NO way I would use a mallet on these in a high torque situation. Maybe I got a bad #1. It is ALWAYS possible. I thought that I would have these drivers for.... 10+ YEARS. I have some cheap Craftmans acetate handled drivers, that I've had for 10+ years and they have seen better days. But are functional. I don't think these will have that life. I know the #1 definitely will not have that longevity. So after searching for the perfect drivers for...3-4 months. I'm a bit disappointed in my decision. Hopefully it's just a really really really bad heat treated head and the rest of them with last. ?‍??

!