Gedore 1500 CTD-20 BIT Socket assortment 1/4" in CT tool module

NOTE: The product title and description supersede the image shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.

Gedore

List Price: $323.35
$219.88
(No reviews yet) Write a Review
Stock Status:
Gedore may not be backordered at this time.

Out of stock

SKU:
GR1733419
Availability:
0imported on order
Out of stock Gedore products may not be backordered at this time due to supply chain issues.
Gedore 1500 CTD-20 BIT Socket assortment 1/4" in CT tool module
1/4" square drive socket, long pattern: 4mm
1/4" square drive socket, long pattern: 4.5mm
1/4" square drive socket, long pattern: 5mm
1/4" square drive socket, long pattern: 6mm
1/4" square drive socket, long pattern: 7mm
1/4" square drive socket, long pattern: 8mm
1/4" square drive socket, long pattern: 9mm
1/4" square drive socket, long pattern: 10mm
1/4" square drive socket, long pattern: 12mm
1/4" square drive socket, long pattern: 13mm
Slotted insert bit: 4mm
Slotted insert bit: 5.5mm
Slotted insert bit: 6.5mm
Slotted insert bit: 8mm
Hex insert bit: 2.5mm
Hex insert bit: 3mm
Hex insert bit: 4mm
Hex insert bit: 5mm
Hex insert bit: 6mm
XZN insert bit: M5
XZN insert bit: M6
XZN insert bit: M8
Torx insert bit: T6
Torx insert bit: T7
Torx insert bit: T8
Torx insert bit: T9
Torx insert bit: T10
Torx insert bit: T15
Torx insert bit: T20
Torx insert bit: T25
Torx insert bit: T27
Torx insert bit: T30
Torx insert bit: T40
Phillips insert bit: #1
Phillips insert bit: #2
Phillips insert bit: #3
Pozidriv insert bit: #1
Pozidriv insert bit: #2
Pozidriv insert bit: #3
Miniature LED lamp with swivel end
1/4" square drive male to 1/4" hex drive male adaptor
1/4" hex drive insert bit holder for power tools
1/4" square drive female to 1/4" hex drive female adaptor
1/4" hex insert bit holding screwdriver handle
Combination holding tool
Only suitable for tool trolley 2004, and workbenches 1502, 1504, 1505 and 1506 XL
For models 2005, 2430 and 1504 XL with distance module 1500 ED-70 S
Dimensions: W 475 x D 77 x H 40 mm
Gedore Warranty (Abridged)
  1. GEDORE warrants to Customers who purchase a Product from the GEDORE catalogue, website or an authorized GEDORE dealer for use in their profession that the Product will be free from defects in workmanship and materials. GEDORE brand torque control tools are warranted for twelve (12) months from date of purchase and up to 5,000 torque cycles (whereafter GEDORE recommends re-calibration). Consumable Products are warranted only against defects in workmanship or materials that prevent their use. For purposes of this Warranty, Consumable Products are defined as those Products which are reasonably expected to be used up or damaged during use, including without limitation drill bits, saw and knife blades, grinding and sanding discs, knife blades, files, sensors and batteries. This Warranty extends only to the original Customer and may not be transferred or assigned to any third party.

  2. GEDORE, at its option, will repair or replace Products due to defects in workmanship or materials, or provide a refund by repaying or crediting Customer with an amount equal to the purchase price of such Products. The repair, replacement or refund of the Products shall be at the election and expense of GEDORE, and shall be Customer's sole and exclusive remedy, in lieu of any and all other rights and remedies which Customer may otherwise have. To obtain Warranty service, Customer shall follow the Return of Product procedures set forth in Paragraph 6 below. GEDORE is not responsible for Products which are lost or damaged during return. It is recommended that Customer: (1) send the returned Product with a tracking or delivery confirmation number; (2) use a carrier offering shipment tracking for all returns; and (3) either insure the Product during shipment or declare the full value of the shipment so that Customer is protected if the Product is lost or damaged during shipment. GEDORE is not liable for the repair, replacement or refund of a Product without valid proof of purchase or delivery.

  3. The Warranty described above applies only when the Product has been subject to normal use, and does not cover defects or failures resulting from abnormal use, unreasonable use, misuse, abuse, accident, alteration, modification, neglect, lack of maintenance, use after the Product is significantly worn, or when repairs to the Product have been made or attempted by persons other than GEDORE (collectively, 'Abuse'). By repairing, replacing or providing a refund on a Product, GEDORE does not waive a claim that a Product was subject to Abuse.
Indieset:
Tool Sets
Tipstyle:
Hex
Tipstyle:
Torx
Tipstyle:
PoziDriv
Tipstyle:
Slotted
Tipstyle:
XZN Triple Square
Tipstyle:
Phillips
Tipsize:
Phillips #1
Tipsize:
Phillips #2
Tipsize:
Phillips #3
Tipsize:
Slotted 4.0 mm (5/32 in.)
Tipsize:
Slotted 5.5 mm
Tipsize:
Slotted 6.5 mm
Tipsize:
Slotted 8.0 mm
Tipsize:
Pozidriv #1
Tipsize:
Pozidriv #2
Tipsize:
Pozidriv #3
Tipsize:
Hex Metric 2.0 mm
Tipsize:
Hex Metric 2.5 mm
Tipsize:
Hex Metric 3.0 mm
Tipsize:
Hex Metric 4.0 mm
Tipsize:
Hex Metric 5.0 mm
Tipsize:
Hex Metric 6.0 mm
Tipsize:
Hex Metric 8.0 mm
Tipsize:
Hex Metric 10 mm
Tipsize:
Torx T6
Tipsize:
Torx T7
Tipsize:
Torx T8
Tipsize:
Torx T9
Tipsize:
Torx T10
Tipsize:
Torx T15
Tipsize:
Torx T20
Tipsize:
Torx T25
Tipsize:
Torx T27
Tipsize:
Torx T30
Tipsize:
Torx T40
Tipsize:
XZN M5 (Triple Square)
Tipsize:
XZN M6 (Triple Square)
Tipsize:
XZN M8 (Triple Square)
Metricsize:
4.0 mm
Metricsize:
4.5 mm
Metricsize:
5.0 mm
Metricsize:
6.0 mm
Metricsize:
7.0 mm
Metricsize:
8.0 mm
Metricsize:
9.0 mm
Metricsize:
10 mm
Metricsize:
12 mm
Metricsize:
13 mm
Ratchetdrivesize:
1/4 Inch Square Drive
Country of Origin:
Made in Germany
Stockstatus:
Out of Stock
UPC/EAN:
4010886840337