Gedore 2104 Splitting chisel, 240x26x4 mm

NOTE: The product title and description supersede the image shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.


List Price: $10.25
Stock Status:
Gedore may not be backordered at this time.

Out of stock

Out of stock Gedore products may not be backordered at this time due to supply chain issues.
Gedore 2104 Splitting chisel, 240x26x4 mm
Chrome-vanadium steel
Carefully hardened and tempered along the full length
Striking heads inductively tempered
Working edges polished and clear varnished

Gedore Warranty (Abridged)
  1. GEDORE warrants to Customers who purchase a Product from the GEDORE catalogue, website or an authorized GEDORE dealer for use in their profession that the Product will be free from defects in workmanship and materials. GEDORE brand torque control tools are warranted for twelve (12) months from date of purchase and up to 5,000 torque cycles (whereafter GEDORE recommends re-calibration). Consumable Products are warranted only against defects in workmanship or materials that prevent their use. For purposes of this Warranty, Consumable Products are defined as those Products which are reasonably expected to be used up or damaged during use, including without limitation drill bits, saw and knife blades, grinding and sanding discs, knife blades, files, sensors and batteries. This Warranty extends only to the original Customer and may not be transferred or assigned to any third party.

  2. GEDORE, at its option, will repair or replace Products due to defects in workmanship or materials, or provide a refund by repaying or crediting Customer with an amount equal to the purchase price of such Products. The repair, replacement or refund of the Products shall be at the election and expense of GEDORE, and shall be Customer's sole and exclusive remedy, in lieu of any and all other rights and remedies which Customer may otherwise have. To obtain Warranty service, Customer shall follow the Return of Product procedures set forth in Paragraph 6 below. GEDORE is not responsible for Products which are lost or damaged during return. It is recommended that Customer: (1) send the returned Product with a tracking or delivery confirmation number; (2) use a carrier offering shipment tracking for all returns; and (3) either insure the Product during shipment or declare the full value of the shipment so that Customer is protected if the Product is lost or damaged during shipment. GEDORE is not liable for the repair, replacement or refund of a Product without valid proof of purchase or delivery.

  3. The Warranty described above applies only when the Product has been subject to normal use, and does not cover defects or failures resulting from abnormal use, unreasonable use, misuse, abuse, accident, alteration, modification, neglect, lack of maintenance, use after the Product is significantly worn, or when repairs to the Product have been made or attempted by persons other than GEDORE (collectively, 'Abuse'). By repairing, replacing or providing a refund on a Product, GEDORE does not waive a claim that a Product was subject to Abuse.
Individual Tools
225-249mm (9.0-9.9 inches)
Country of Origin:
Made In Germany
Out of Stock

4 Reviews Write a Review

  • 5
    Strength and durability

    Posted by JK on Feb 10th 2021

    Very affordable split chisel with Gedore quality, can’t be beat.

  • 5

    Posted by JK on Feb 10th 2021

    Nice quality chisel, really thin

  • 5
    Tough Steel

    Posted by PRB on May 22nd 2020

    Using this for splitting sedimentary stone. Great steel. Tough, but not brittle and holds a dressed edge well.

  • 5

    Posted by Joel Mansfield on Mar 18th 2019

    I used this chisel to bust through the mortar layers on a sandstone block stair. The thin profile made it a bit easier cutting into the mortar, but you sacrifice a little on the handhold. The thin bar started to wear out my hand after a few hours with a 1250g club hammer. Also helped get the mortar off of a concrete patio to put in the replacement steps. Maybe not the best tool for the job, but it outlasted my Campbell Hausfeld air hammer, 18V rotary hammer, and cut faster than my Dasco mason chisel with minimal splaying on the hammer end and almost no visible wear on the cutting end. My arms sure are tired, but the job is done. RIP air hammer and rotary hammer. Going to have to replace those now.