Gedore 2133 T 8 Nut driver with 2C-T-handle 8 mm

(No reviews yet) Write a Review
List Price: $43.81
(No reviews yet) Write a Review
Stock Status:
item out of stock 0 In Stock. Backorderable
Adding to cart… The item has been added
0USA inventory
Free to the lower 48 states at $75+
other US states and territories at $150+
and Canada at $300+
Learn More
Gedore 2133 T 8 Nut driver with 2C-T-handle 8 mm

Asymmetrical 2-component wing handle for high torque level when loosening or tightening. The lengthened wing provides an optimum contact surface for the palm of one's hand. It thus easily transfers considerable forces in a relaxed hand's position.
With T-shaped cross-section: broad at the top and slender below. In this way one's hand takes on a firm grip leading to vigorous working over an extended period without any fatigue.

Soft zones where sensitive hand zones grip e.g. finger tips. Hard zones where robust hand zones grip.
Hard component made of fiberglass reinforced plastic with special purpose glass fibers. The benefits of short glass fibers (rigidity and firmness) are combined with that of long glass fibers (impact strength).
Soft component made of thermoplastic elastomer
The concave form ensures exact hand centering and stops any blade tilting.
With hanging hole
Head depth 25 mm
GEDORE vanadium steel 31CrV3, matt chrome-plated
NOTE: The product title and description supersede the image(s) shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.
Gedore Warranty (Abridged)
  1. GEDORE warrants to Customers who purchase a Product from the GEDORE catalogue, website or an authorized GEDORE dealer for use in their profession that the Product will be free from defects in workmanship and materials. GEDORE brand torque control tools are warranted for twelve (12) months from date of purchase and up to 5,000 torque cycles (whereafter GEDORE recommends re-calibration). Consumable Products are warranted only against defects in workmanship or materials that prevent their use. For purposes of this Warranty, Consumable Products are defined as those Products which are reasonably expected to be used up or damaged during use, including without limitation drill bits, saw and knife blades, grinding and sanding discs, knife blades, files, sensors and batteries. This Warranty extends only to the original Customer and may not be transferred or assigned to any third party.

  2. GEDORE, at its option, will repair or replace Products due to defects in workmanship or materials, or provide a refund by repaying or crediting Customer with an amount equal to the purchase price of such Products. The repair, replacement or refund of the Products shall be at the election and expense of GEDORE, and shall be Customer's sole and exclusive remedy, in lieu of any and all other rights and remedies which Customer may otherwise have. To obtain Warranty service, Customer shall follow the Return of Product procedures set forth in Paragraph 6 below. GEDORE is not responsible for Products which are lost or damaged during return. It is recommended that Customer: (1) send the returned Product with a tracking or delivery confirmation number; (2) use a carrier offering shipment tracking for all returns; and (3) either insure the Product during shipment or declare the full value of the shipment so that Customer is protected if the Product is lost or damaged during shipment. GEDORE is not liable for the repair, replacement or refund of a Product without valid proof of purchase or delivery.

  3. The Warranty described above applies only when the Product has been subject to normal use, and does not cover defects or failures resulting from abnormal use, unreasonable use, misuse, abuse, accident, alteration, modification, neglect, lack of maintenance, use after the Product is significantly worn, or when repairs to the Product have been made or attempted by persons other than GEDORE (collectively, 'Abuse'). By repairing, replacing or providing a refund on a Product, GEDORE does not waive a claim that a Product was subject to Abuse.
Individual Tools
Nut Driver
Nut Driver Metric 8.0 mm
250-299mm (10.0-11.9 inches)
Multi-Component Material
Country of Origin:
Made in Slovenia
Out of Stock