Gedore 8320-200 JC Wire Rope Cutter

NOTE: The product title and description supersede the image shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.


List Price: $206.70
(No reviews yet) Write a Review
Stock Status:
item in stock 1 In Stock.
Adding to cart… The item has been added

Gedore 8320-200 JL Wire rope cutter

Easy-to-change cutting plates
Cutting plates of powder metallurgical high-speed steel (HSS). Manufactured in the MIM process (Metal Injection Molding)
Extremely high durability compared to traditional wire rope cutters
Extremely soft shearing cut reliably prevents the wire rope from fanning out
Tip: Can be operated with one hand of an average size up to a 5 mm diameter. Therefore optimally suited as shears in an emergency at sea. Jaws/Cutting edges:
Specially arched cutting edges
Easy to replace cutting plates if worn
Hardness 62 - 65 HRC
Low force needed due to the optimum cutting-edge geometry
Two integrated press profiles for Bowden cable terminal sleeves and cable end sleeves Cutting performance:
Wire ropes up to 1800 N/mm2 with max. 6 mm diameter (e.g. stainless steel wire ropes, wire ropes with steel and textile cores, Bowden cables, shears)
Wire up to 750 N/mm2 with max. 4 mm diameter (e.g. nails/wire nails, screws, bolts, ceiling banners)
Single- and multi-core copper and aluminium cables with max. 6 mm diameter Joint:
Adjustable joint for precise cutting plate guidance
Latch to prevent unwanted opening Handles:
JC = with 2-component grip protection covers and chrome plated
Plier body hot drop-forged

Gedore Warranty (Abridged)
  1. GEDORE warrants to Customers who purchase a Product from the GEDORE catalogue, website or an authorized GEDORE dealer for use in their profession that the Product will be free from defects in workmanship and materials. GEDORE brand torque control tools are warranted for twelve (12) months from date of purchase and up to 5,000 torque cycles (whereafter GEDORE recommends re-calibration). Consumable Products are warranted only against defects in workmanship or materials that prevent their use. For purposes of this Warranty, Consumable Products are defined as those Products which are reasonably expected to be used up or damaged during use, including without limitation drill bits, saw and knife blades, grinding and sanding discs, knife blades, files, sensors and batteries. This Warranty extends only to the original Customer and may not be transferred or assigned to any third party.

  2. GEDORE, at its option, will repair or replace Products due to defects in workmanship or materials, or provide a refund by repaying or crediting Customer with an amount equal to the purchase price of such Products. The repair, replacement or refund of the Products shall be at the election and expense of GEDORE, and shall be Customer's sole and exclusive remedy, in lieu of any and all other rights and remedies which Customer may otherwise have. To obtain Warranty service, Customer shall follow the Return of Product procedures set forth in Paragraph 6 below. GEDORE is not responsible for Products which are lost or damaged during return. It is recommended that Customer: (1) send the returned Product with a tracking or delivery confirmation number; (2) use a carrier offering shipment tracking for all returns; and (3) either insure the Product during shipment or declare the full value of the shipment so that Customer is protected if the Product is lost or damaged during shipment. GEDORE is not liable for the repair, replacement or refund of a Product without valid proof of purchase or delivery.

  3. The Warranty described above applies only when the Product has been subject to normal use, and does not cover defects or failures resulting from abnormal use, unreasonable use, misuse, abuse, accident, alteration, modification, neglect, lack of maintenance, use after the Product is significantly worn, or when repairs to the Product have been made or attempted by persons other than GEDORE (collectively, 'Abuse'). By repairing, replacing or providing a refund on a Product, GEDORE does not waive a claim that a Product was subject to Abuse.
Individual Tools
200-224mm (8.0-8.9 inches)
Multi-Component Material
Country of Origin:
Made in Austria
In Stock