Gedore K 1900-018 Hand-operated 1/2" Impact Driver Set

NOTE: The product title and description supersede the image shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.


List Price: $314.60
Stock Status:
item in stock 1 In Stock.
Adding to cart… The item has been added
Gedore K 1900-018 hand-operated impact driver set
1/2" square drive hand-operated impact driver
5/16" hex drive slotted bit: 5.5mm
5/16" hex drive slotted bit: 5.5mm
5/16" hex drive slotted bit: 8mm
5/16" hex drive slotted bit: 12mm
5/16" hex drive hex bit: 4mm
5/16" hex drive hex bit: 5mm
5/16" hex drive hex bit: 6mm
5/16" hex drive hex bit: 8mm
5/16" hex drive hex bit: 10mm
5/16" hex drive Phillips bit: #2
5/16" hex drive Phillips bit: #3
5/16" hex drive Phillips bit: #4
5/16" hex drive Torx bit: T27
5/16" hex drive Torx bit: T30
5/16" hex drive Torx bit: T40
5/16" hex drive Torx bit: T45
1/2" square drive female to 5/16" hex drive female adaptor
Complete with the most frequently used bits, for use on screws and bolts with slotted, cross-head or hexagon heads
Reversible for right and left hand operation
In plastic case
Dimensions: 200 x 120 x 38 mm
TORX = reg. trademark of Acument Intellectual Properties, LLC. USA

Gedore Warranty (Abridged)
  1. GEDORE warrants to Customers who purchase a Product from the GEDORE catalogue, website or an authorized GEDORE dealer for use in their profession that the Product will be free from defects in workmanship and materials. GEDORE brand torque control tools are warranted for twelve (12) months from date of purchase and up to 5,000 torque cycles (whereafter GEDORE recommends re-calibration). Consumable Products are warranted only against defects in workmanship or materials that prevent their use. For purposes of this Warranty, Consumable Products are defined as those Products which are reasonably expected to be used up or damaged during use, including without limitation drill bits, saw and knife blades, grinding and sanding discs, knife blades, files, sensors and batteries. This Warranty extends only to the original Customer and may not be transferred or assigned to any third party.

  2. GEDORE, at its option, will repair or replace Products due to defects in workmanship or materials, or provide a refund by repaying or crediting Customer with an amount equal to the purchase price of such Products. The repair, replacement or refund of the Products shall be at the election and expense of GEDORE, and shall be Customer's sole and exclusive remedy, in lieu of any and all other rights and remedies which Customer may otherwise have. To obtain Warranty service, Customer shall follow the Return of Product procedures set forth in Paragraph 6 below. GEDORE is not responsible for Products which are lost or damaged during return. It is recommended that Customer: (1) send the returned Product with a tracking or delivery confirmation number; (2) use a carrier offering shipment tracking for all returns; and (3) either insure the Product during shipment or declare the full value of the shipment so that Customer is protected if the Product is lost or damaged during shipment. GEDORE is not liable for the repair, replacement or refund of a Product without valid proof of purchase or delivery.

  3. The Warranty described above applies only when the Product has been subject to normal use, and does not cover defects or failures resulting from abnormal use, unreasonable use, misuse, abuse, accident, alteration, modification, neglect, lack of maintenance, use after the Product is significantly worn, or when repairs to the Product have been made or attempted by persons other than GEDORE (collectively, 'Abuse'). By repairing, replacing or providing a refund on a Product, GEDORE does not waive a claim that a Product was subject to Abuse.
Impact Rated
Tool Sets
Phillips #2
Phillips #3
Phillips #4
Slotted 5.5 mm
Slotted 6.5 mm
Slotted 8.0 mm
Slotted 12 mm
Hex Metric 2.0 mm
Hex Metric 2.5 mm
Hex Metric 3.0 mm
Hex Metric 4.0 mm
Hex Metric 5.0 mm
Hex Metric 6.0 mm
Hex Metric 8.0 mm
Hex Metric 10 mm
Torx T27
Torx T30
Torx T40
Torx T45
1/2 Inch Square Drive
Country of Origin:
Made in Germany
In Stock

1 Review Write a Review

  • 5
    Heavy Duty and Hard to Beat

    Posted by James on Jun 15th 2022

    I bought this to make it possible to remove those impossible-to-remove fasteners that are usually rusted in place. An electric or pneumatic impact driver is critically different from this in that those drivers impact fasteners in a radial action only--they are good for tight fasteners, but not as much for the most rusted and stuck fasteners. This device has the rotating action combined with the hammering action that presses the bit into the fastener, meaning that this impact driver is less likely to slip as it makes each impact. The bits in this set all seem quite well made. I think the most useful bits will be the Philips and Slotted, since those are always the easiest to slip and strip with a screwdriver. The only thing I wish were included in this box is a 1/2" square to 1/4" hex adapter for 1/4" bits. The set includes a 1/2"-5/16" adapter for larger bits, but the 1/4" bits are more common and easier to replace. I might purchase the other adapter to use it with my other impact bits as needed.