Gedore VDE 2164 SL/PH2 VDE Screwdriver SLIM DRIVE PlusMinus

NOTE: The product title and description supersede the image shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.


List Price: $26.68
Stock Status:
item in stock 1 In Stock. Not backorderable.
Adding to cart… The item has been added
Gedore VDE 2164 SL/PH2 VDE Screwdriver SLIM DRIVE PlusMinus
Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade
3-component handles Power-Grip with hanging hole
Ergonomic handle design enables precise and fatigue-free working
Positive-fit joint of handle and blade for optimum transmission of force
Type of drive marked at the end of the handle
Ultra-small blade diameter yet with full mechanical and electrical safety
No problems in reaching screws deeply embedded in screw shafts
Blade from GEDORE molybdenum-vanadium-Plus tempered steel
Gedore Warranty (Abridged)
  1. GEDORE warrants to Customers who purchase a Product from the GEDORE catalogue, website or an authorized GEDORE dealer for use in their profession that the Product will be free from defects in workmanship and materials. GEDORE brand torque control tools are warranted for twelve (12) months from date of purchase and up to 5,000 torque cycles (whereafter GEDORE recommends re-calibration). Consumable Products are warranted only against defects in workmanship or materials that prevent their use. For purposes of this Warranty, Consumable Products are defined as those Products which are reasonably expected to be used up or damaged during use, including without limitation drill bits, saw and knife blades, grinding and sanding discs, knife blades, files, sensors and batteries. This Warranty extends only to the original Customer and may not be transferred or assigned to any third party.

  2. GEDORE, at its option, will repair or replace Products due to defects in workmanship or materials, or provide a refund by repaying or crediting Customer with an amount equal to the purchase price of such Products. The repair, replacement or refund of the Products shall be at the election and expense of GEDORE, and shall be Customer's sole and exclusive remedy, in lieu of any and all other rights and remedies which Customer may otherwise have. To obtain Warranty service, Customer shall follow the Return of Product procedures set forth in Paragraph 6 below. GEDORE is not responsible for Products which are lost or damaged during return. It is recommended that Customer: (1) send the returned Product with a tracking or delivery confirmation number; (2) use a carrier offering shipment tracking for all returns; and (3) either insure the Product during shipment or declare the full value of the shipment so that Customer is protected if the Product is lost or damaged during shipment. GEDORE is not liable for the repair, replacement or refund of a Product without valid proof of purchase or delivery.

  3. The Warranty described above applies only when the Product has been subject to normal use, and does not cover defects or failures resulting from abnormal use, unreasonable use, misuse, abuse, accident, alteration, modification, neglect, lack of maintenance, use after the Product is significantly worn, or when repairs to the Product have been made or attempted by persons other than GEDORE (collectively, 'Abuse'). By repairing, replacing or providing a refund on a Product, GEDORE does not waive a claim that a Product was subject to Abuse.
Individual Tools
Insulated 1,000 V
Integrated Insulation (Slim Blade)
Terminal (Xeno)
100 mm (3.9 Inches)
200-224mm (8.0-8.9 inches)
Black Finish
Multi-Component Material
Country of Origin:
Made In Slovenia
In Stock

2 Reviews Write a Review

  • 4
    A Godsend For Electrical Work

    Posted by Matt on Apr 12th 2022

    I found out about the SL/PH design through some electrical reviews on the interwebs and decided to give it a try with this Gedore driver. Basically, the head is a combination of a slotted driver and Phillips driver. It fits exceptionally well on the terminal screws on outlets. This decreases the chances of stripping the screw and allows one to really get a snug fit over the wire. The screwdriver head is holding up well with no deformation and only minor wear on the coating. The handle is more of a rectangle. I find this shape stops the screwdriver from rolling around (a postive) but more difficult to spin freely in my hand (a negative). The slim shaft helps with access and the build quality is fantasitc. I'd highly recommend this screwdriver.

  • 5

    Posted by Jeferson on Oct 8th 2020

    It really is very good, it fulfills the purpose of fitting circuit breakers with ease.