Fully automatic motor-driven rotary laser for horizontal applications – ready for immediate use with fast, self-leveling within 10 seconds.
High leveling accuracy of +/- 1/8 in @ 100 ft (+/- 0.1 mm/m).
Quality and precision, made in Germany
Extremely tough thanks to the STABILA PROTECTOR system – even when dropped from a tripod at a height of up to 6 ft (1.8 m): just set up the tripod again, switch on and continue measuring.
IP 65 - dust and waterproof
Resistant to heat and cold from 14 to 140 degrees F (-10 to +60 degrees C).
Exceptionally easy to operate at just the touch of a button.
Large working area with set receiver – up to 2600 ft (800 m) diameter.
Correct heights quickly – digital read-out shows you exact distance from grade, arrows point you and down.
Receiver with visual and acoustic guidance as well as two displays.
5/8“ thread for attaching to a tripod.
Hard case for easy transport.
Bricklaying – creating a perfect, level foundation.
Reinforced concrete construction – concreting foundations.
Carpentry and wood construction – adjusting the height of the ring beam.
Civil engineering and pipeline construction – for example, trenching.
Gardening and landscaping work – laying out garden areas, paths and paving.
Laser class: 2
Output: < 1 mW
Laser wavelength: 635 nm
Self-levelling range: +/- 5 degrees
Levelling accuracy +/-: 1/8 in @ 100 ft
Diameter of working area for set receiver: 2600 ft
Operating life: 80 h
Protection class: IP 65
Tripod connection: 5/8"- 11
LAR 300 rotary laser
REC 300 receiver with clamp
BST-S construction tripod
Hi/Lo elevation rod
2 x D (1.5V) batteries
2 x AA (1.5V) batteries
Warranty Overview for the United States and Canada.
STABILA spirit levels will maintain their stated accuracy for life. The fixed vials on all STABILA levels will not fog, leak, or become inaccurate. If they do, you will be given a new level.
Vials that are melted due to excessive heat (example: welding) are not covered under the warranty policy. Bent or damaged frames void warranty.
Laser and Tech (Electronic) Levels
We will repair, without charge, any defects due to faulty materials or workmanship for two years from the date of purchase. Must have copy of receipt for after sale service.
Accessories: Tape Measures, Tripods, Cases, Grade Rods, Etc.
30 Day Warranty against manufacturer defects from the date of purchase.
Moving Parts, I.E. protractor vials, and the extending portion of Plate and XtL levels are not covered under the lifetime guarantee.
Levels with an extension arm that are used on a daily basis require annual user maintenance. We offer an easy to install "maintenance kit" (part #33000) available through your local Stabila dealer that provides all of the slide bearings, lock parts, a new tension spring, wrenches and instructions to renew your slide assembly in less than five minutes.