Self-leveling multi-line laser with full 360 degree horizontal line for establishing control lines, two vertical lines at a 90 degree angle to one another and a plumb line upwards and plumb dot/point downwards for exact layout work
MANUAL ALIGNMENT: accurate pivoting of the vertical laser lines to a target point using the knob - the laser rotates through the plumb-line dot without losing its position
Work directly on the bright, fine laser lines at distances of up to 60ft
Rotatable housing with extendable foot for height adjustment for working directly above metal track and wooden plates
Pulse-modulated laser lines for working with an optional line receiver (see part number SA07335)
Mechanical, solid and secure pendulum lock when in the Off position
Versatile use: can be used on the floor, on a tripod (5/8-11 thread) or attached to steel objects with the V groove magnet in the laser housing
4 X AA batteries included
For a wide range of tasks in drywall construction - for layout work, when positioning partition walls and suspending ceilings. Transfer heights quickly and easily in electrical installation work - align plug outlets, switches and cable trays horizontally and vertically with one another. For tiling work - when marking out the tile layout and when aligning and laying the tiles. Precise transfer of marking points during plumbing work - align pipe hangers vertically and horizontally with one another.
Laser class: 2
Output: < 1 mW
Laser wavelength: 635 nm
Self-leveling range +/-: 4 degrees
Leveling accuracy +/-: 3/16 in @ 50 ft
Line straightness +/-: 1/8 in @ 50 ft
Laser beam accuracy (down) +/-: 3/16 in @ 50 ft
Measuring range of set receiver: 490 ft
Measuring range of visible point: 60 ft
Measuring range of visible line: 60 ft
Operating life: 10 h
Battery type: AA
Protection class: IP 54
Tripod connection: 5/8"- 11
LAX 400 multi-line laser, laser goggles, target plate, wall bracket, carrying case, 4 x AA (1.5 V) batteries
Warranty Overview for the United States and Canada.
STABILA spirit levels will maintain their stated accuracy for life. The fixed vials on all STABILA levels will not fog, leak, or become inaccurate. If they do, you will be given a new level.
Vials that are melted due to excessive heat (example: welding) are not covered under the warranty policy. Bent or damaged frames void warranty.
Laser and Tech (Electronic) Levels
We will repair, without charge, any defects due to faulty materials or workmanship for two years from the date of purchase. Must have copy of receipt for after sale service.
Accessories: Tape Measures, Tripods, Cases, Grade Rods, Etc.
30 Day Warranty against manufacturer defects from the date of purchase.
Moving Parts, I.E. protractor vials, and the extending portion of Plate and XtL levels are not covered under the lifetime guarantee.
Levels with an extension arm that are used on a daily basis require annual user maintenance. We offer an easy to install "maintenance kit" (part #33000) available through your local Stabila dealer that provides all of the slide bearings, lock parts, a new tension spring, wrenches and instructions to renew your slide assembly in less than five minutes.