Tool of the Day™
Essentials
The Seasonal
New Arrivals
Staff Picks
Sale
Clearance
Wera
Knipex
Hazet
Gedore
Stabila
Stahlwille
Felo
NWS
Heyco
Witte
Bits & Accessories
Cutters & Pincers
Pliers
Ratchets & Sockets
Screwdrivers
Wrenches
Wera 136073 Safe-Torque A 1 SHK Set 1, 1/4" Square Drive, 2-12 Nm, 20 Pieces, Metric
The all-around compact 1/4" torque kit
Safe-Torque A1 torque wrench has a measuring range of 2 - 12 Nm (2 - 9 ft.-lbs.) and can be used to torque in both clockwise and counter-clockwise directions
Slide-over mechanism disengages the tightening mechanism when the desired torque value has been reached - the fastener cannot be overtightened!
Audible and tactile signal when torque limit has been reached
Torque function can be disengaged, allowing high-torque loosening and tightening without damage to the torque mechanism
72-tooth ratchet design, yielding a low return angle of 5 degrees
The set also includes an assortment of sockets in the most-needed drive types and sizes
Durable nylon case with Velcro closure
Set includes:
The all-around compact 1/4" torque kit
Safe-Torque A1 torque wrench has a measuring range of 2 - 12 Nm (2 - 9 ft.-lbs.) and can be used to torque in both clockwise and counter-clockwise directions
Slide-over mechanism disengages the tightening mechanism when the desired torque value has been reached - the fastener cannot be overtightened!
Audible and tactile signal when torque limit has been reached
Torque function can be disengaged, allowing high-torque loosening and tightening without damage to the torque mechanism
72-tooth ratchet design, yielding a low return angle of 5 degrees
The set also includes an assortment of sockets in the most-needed drive types and sizes
Durable nylon case with Velcro closure
Set includes:
Safe-Torque A1 Torque Wrench, 1/4" external square drive, 2 - 12 Nm
8790 HMA External Hex Sockets, 1/4" drive: 5.5, 6.0, 7.0, 8.0, 10.0, 11.0, 12.0, 13.0 mm
8767 A HF Holding Function Torx Sockets, 1/4" drive: TX 15, TX 20, TX 25, TX 30
8740 A HF Holding Function Inside Hex Sockets, 1/4" drive: 3.0, 4.0, 5.0, 6.0, 8.0 mm
8794 A Extension, 1/4" drive, 75 mm
Hook and Loop Fastener, 50 x 240 mm
All Wera professional hand tools are covered by a lifetime warranty against breakage due to defects in materials or workmanship for the normal life of the product. This policy does not cover products which have been altered in any way, and products which have been subject to abuse, misuse, negligence, or improper storage. Bits, bitholders and L-keys are also not covered under this warranty policy as they are considered consumable. Wera Tools reserves the right to inspect warranty claims before replacements are issued. Return transportation costs are not included, however Wera will send replacement tools at no cost. Any claims for reasons other than those noted here must be approved by Wera Tools Inc. All returns are subject to inspection prior to replacement.
All Wera tools must be sent to Wera for warranty claims. Use the following link to start this process.
Submit warranty claim here
All Wera tools must be sent to Wera for warranty claims. Use the following link to start this process.
Submit warranty claim here
