Wera 345274 Kraftform Micro Hex SAE Precision Screwdriver Set

NOTE: The product title and description supersede the image shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.


List Price: $32.35
Stock Status:
item in stock 10+ In Stock.
Adding to cart… The item has been added
Wera 2054/8 Kraftform Micro Electronics Precision Hex Screwdriver
HexPlus Screwdriver: 0.028" x 40mm
HexPlus Screwdriver: 0.035" x 40mm
HexPlus Screwdriver: 0.05" x 40mm
HexPlus Screwdriver: 1/16" x 60mm
HexPlus Screwdriver: 5/64" x 60mm
HexPlus Screwdriver: 3/32" x 60mm
HexPlus Screwdriver: 7/64" x 60mm
HexPlus Screwdriver: 1/8" x 60mm
Wera's Hex-Plus design helps to keep the screw head in tact with narrow contact surfaces. Standard hex designs tend to round out the screw head.
Designed to reduce the fastening time and cost per screw connection
The spinning cap and the thin profile areas allow for very rapid twisting, and you won't have to readjust your grip.
Hand support on convex/concave cap offers both an easy turning action and comfortable hand rest
Wera Black Point tip and hardening process guarantee long service life and increased corrosion protection
Anti-roll protection stops screwdrivers from rolling away
Manufacturer Part #: 05345274001
All Wera professional hand tools are covered by a lifetime warranty against breakage due to defects in materials or workmanship for the normal life of the product. This policy does not cover products which have been altered in any way, and products which have been subject to abuse, misuse, negligence, or improper storage. Bits, bitholders and L-keys are also not covered under this warranty policy as they are considered consumable. Wera Tools reserves the right to inspect warranty claims before replacements are issued. Return transportation costs are not included, however Wera will send replacement tools at no cost. Any claims for reasons other than those noted here must be approved by Wera Tools Inc. All returns are subject to inspection prior to replacement.

All Wera tools must be sent to Wera for warranty claims. Use the following link to start this process.
Submit warranty claim here
Hex SAE 0.028 Inch (0.71 mm)
Hex SAE 0.035 Inch (0.89 mm)
Hex SAE 0.050 Inch (1.27 mm)
Hex SAE 1/16 inch
Hex SAE 5/64 inch
Hex SAE 3/32 inch
Hex SAE 7/64 inch
Hex SAE 1/8 inch
Multi-Component Material
Tool Sets
Black Finish
Country of Origin:
Made in Czech Republic
In Stock

11 Reviews Write a Review

  • 5
    Micro Hex SAE screwdrivers

    Posted by Eulice on Oct 18th 2020

    These are awesome. They are very comfortable to use. The handle is just the right length to get leverage on stubborn or hard to reach screws. I'm replacing an old busted set and these were the best choice.

  • 5
    Pleasure to use, seem to be very durable

    Posted by Ed Burdick on Oct 24th 2019

    These little drivers are very nice to use with the perfect shape for small fasteners. The tips have the Wera hex plus cross section, which I expect to make a big difference with these tiny socket heads. Tiny hex drivers I have used have typically either had tiny long shafts that twist too much with torque, or ends that eventually break off. These shafts are appropriately sized and the ends seem to be pretty tough. So far, very happy with these.

  • 5
    Excellent product

    Posted by Jason on Feb 22nd 2019

    I like the grip on these and the tips seem to be strong.

  • 5
    Excellent German Hex driver Kit

    Posted by Jeff Logue on Feb 4th 2019

    This kit is perfect for my trade and can think of no better designed precise fitment tips as these have theres top shelf precision tools IMHO

  • 5
    Perfect tips

    Posted by Bruno on Feb 22nd 2017

    Always perfect like all those wera screwdriver.

  • 5
    Wera 2054/8 Screwdriver Set

    Posted by Roy Sutton on Jun 3rd 2016

    Excellent craftsmanship, just what I needed. - Will buy again.

  • 5
    Micro Hex Driver Set

    Posted by David Goodman Jr on Jun 2nd 2016

    Nice tools, promptly delivered.

  • 5
    Hex wrench

    Posted by Barry Campbell on May 21st 2016

    I found that the wrenches were small enough. - thank you so much

  • 5
    Does your company require you to buy your own tool

    Posted by William Hamilton on Dec 14th 2015

    We had problems with a small set screw in a motor. Tried grinding a screwdriver down; never again. Thanks KC Tool.