Tool of the Day™
Essentials
The Seasonal
New Arrivals
Staff Picks
Sale
Clearance
Wera
Knipex
Hazet
Gedore
Stabila
Stahlwille
Felo
NWS
Heyco
Witte
Bits & Accessories
Cutters & Pincers
Pliers
Ratchets & Sockets
Screwdrivers
Wrenches
Stahlwille 730 Quick Basic wrench with tool carrier for insert tools Size a/10; 20-100 Nm; tool holder 9x12 mm
click-type
mount for interchangeable insert tools
QuickRelease safety lock
rapid setting by easy to operate locking lever inside the handle, ergonomically designed, non-slip adjusters with a thumb recess and magnifying glass integrated into the window
optimised convex handle for strain-free working
dual stop signal
twin scales Nm/ft-lb and Nm/in-lb
the measuring element is only under load while force is being applied, no need for manual reset to zero
can be applied for either clockwise or counterclockwise tightening by turning the inserts over
any force applied to the tool after the 'click' or applied in the opposite direction to the current function - e.g. forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it.
calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly.
with certificate
display deviation value +/- 4%
click-type
mount for interchangeable insert tools
QuickRelease safety lock
rapid setting by easy to operate locking lever inside the handle, ergonomically designed, non-slip adjusters with a thumb recess and magnifying glass integrated into the window
optimised convex handle for strain-free working
dual stop signal
twin scales Nm/ft-lb and Nm/in-lb
the measuring element is only under load while force is being applied, no need for manual reset to zero
can be applied for either clockwise or counterclockwise tightening by turning the inserts over
any force applied to the tool after the 'click' or applied in the opposite direction to the current function - e.g. forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it.
calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly.
with certificate
display deviation value +/- 4%
Stahlwille Tools purchased through KC Tool come with a lifetime warranty against material defects or faulty workmanship except for consumable items such as screwdriver bits and socket adapters. Stahlwille torque products are subject to a separate warranty that has guidelines and regulations on repair labs that have been authorized by Stahlwille to perform service and calibration. The warranty for both torque and non-torque products is void if the tool is tampered with, abused, or used in a manner that is not intended by the manufacturer (i.e. using chrome sockets on an impact gun).
Return tools for warranty replacement directly to KC Tool. All returns are subject to inspection prior to replacement.
Return tools for warranty replacement directly to KC Tool. All returns are subject to inspection prior to replacement.
