Wera 003692 KOLOSS Ratchet 1/2" Drive

NOTE: The product title and description supersede the image shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.


List Price: $152.50
Stock Status:
item in stock 1 In Stock.
Adding to cart… The item has been added
Wera 8002 C Koloss 1/2 inch Square Drive Ratchet with Hammer
Koloss 1/2 inch square drive hammering ratchet
Holster with carabiner
Set of 2 hammer face pads
Multi-component kraftform handle for optimum pressure, impact, and tensile loads
The extension can be used for better leverage
The tubular shaft minimizes impact vibrations
The holster helps to keep tools organized
Ratchet function for 1/2 inch square sockets and 1/2 inch adaptors with square drive ball lock
Hammer function to align workpieces

Design features:
Push-through square drive for forward and reverse operation
Fine-tooth ratchet mechanism
Small return angle of only 6 degrees
Can transfer at least 600 N.m of torque
Dropforged hammer head pinned to shaft in form-fit joint
Dry-fined striking face

Handle end contains adaptor for Koloss extension 8780 C (341mm)

No need to carry two different tools; the tool is unbreakable and is a long-term investment
Sockets and accessories are easily attached
The square drive gives way to impacts and cannot be damaged when the ratchet is used as a hammer
Permanently locked
Hardened square drive
Completely safe
A removable retaining ring makes the ratchet mechanism easy to clean or grease
The push-through square drive, including the tooth system, is far more robust than a forward/reverse switch
The drop-forged hammer head is pinned to the shaft in a form-fit joint

Manufacturer Part #: 05003692001

All Wera professional hand tools are covered by a lifetime warranty against breakage due to defects in materials or workmanship for the normal life of the product. This policy does not cover products which have been altered in any way, and products which have been subject to abuse, misuse, negligence, or improper storage. Bits, bitholders and L-keys are also not covered under this warranty policy as they are considered consumable. Wera Tools reserves the right to inspect warranty claims before replacements are issued. Return transportation costs are not included, however Wera will send replacement tools at no cost. Any claims for reasons other than those noted here must be approved by Wera Tools Inc. All returns are subject to inspection prior to replacement.

All Wera tools must be sent to Wera for warranty claims. Use the following link to start this process.
Submit warranty claim here
Multi-Component Material
Individual Tools
300-349mm (12.0-13.9 inches)
1/2 Inch Square Drive
Country of Origin:
Made in Czech Republic
In Stock

1 Review Write a Review

  • 5
    Great tool to have

    Posted by Allan on Jul 5th 2021

    One way gearing gives it a higher torque rating. If you start here with just the ratchet, you will not be disappointed. Socket adapter has three positions. On, off and a middle position to protect it when you need to strike something using the hammer face. Plastic pads are provided incase the object has a finish you want to protect. Sufficient girth too so you get a solid hit if you do hammer something. It has an extension bar or guide pin that lock into the handle for added benefit. Like I said, great tool. I added a one and zero so I know it’s set already to remove or tighten whatever bolt or nut I’m working with. With the extension, it can handle over 450 pounds. Can’t say enough about it. I already have three.