Wera 133862 KOLOSS Ratchet Set - 1/2" Drive

NOTE: The product title and description supersede the image shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.

Wera

List Price: $169.93
$114.90
(25 reviews)
Stock Status:
item in stock 2 In Stock.
Adding to cart… The item has been added
SKU:
WR133862
Availability:
1
Wera 8002 C Koloss 1/2 inch Square Drive Ratchet with Hammer

Typical applications include: mechanical engineering; ship building; mining; aircraft construction; petroleum industry; industrial plant construction; scaffolding; high rack systems; road building; bridge construction; railway construction and maintenance; commercial vehicle construction and maintenance. Multi-component kraftform handle for optimum pressure, impact, and tensile loads. The extension can be used for better leverage. The tubular shaft minimises impact vibrations. The holster helps to keep tools organised. Ratchet function for 1/2 inch square sockets and 1/2 inch adaptors with square drive ball lock. Hammer function to align workpieces. Design features: Push-through square drive for forward and reverse operation; fine-tooth ratchet mechanism; small return angle of only 6 degrees; can transfer at least 600 N.m of torque; dropforged hammer head pinned to shaft in form-fit joint; dry-fined striking face. Handle end contains adaptor for included Koloss extension 8780 C (341mm). Also includes 8782 C Pad (50mm x 50mm), and holster.

No need to carry two different tools; the tool is unbreakable and is a long-term investment

Sockets and accessories are easily attached; the square drive gives way to impacts and cannot be damaged when the ratchet is used as a hammer; permanently locked; hardened square drive

Completely safe; a removable retaining ring makes the ratchet mechanism easy to clean or grease

The push-through square drive; including the tooth system; is far more robust than a forward/reverse switch

The drop-forged hammer head is pinned to the shaft in a form-fit joint

Manufacturer Part #: 05133862001

All Wera professional hand tools are covered by a lifetime warranty against breakage due to defects in materials or workmanship for the normal life of the product. This policy does not cover products which have been altered in any way, and products which have been subject to abuse, misuse, negligence, or improper storage. Bits, bitholders and L-keys are also not covered under this warranty policy as they are considered consumable. Wera Tools reserves the right to inspect warranty claims before replacements are issued. Return transportation costs are not included, however Wera will send replacement tools at no cost. Any claims for reasons other than those noted here must be approved by Wera Tools Inc. All returns are subject to inspection prior to replacement.

All Wera tools must be sent to Wera for warranty claims. Use the following link to start this process.
Submit warranty claim here
Handlematerial:
Multi-Component Material
Indieset:
Tool Sets
OAL:
300-349mm (12.0-13.9 inches)
Ratchetdrivesize:
1/2 Inch Square Drive
Features:
Ratcheting
Country of Origin:
Made in Czech Republic
Stockstatus:
In Stock
UPC/EAN:
4013288162403

25 Reviews Write a Review

  • 5
    Useful tool, mweh pouch

    Posted by Hilmar on Aug 27th 2018

    Great tool, I like the extension/breaker bar thing. The pouch this set comes with is useless, no way to properly hang both tool and extension. Spendy, but great when I'm under the truck and need a bit of leverage or do a little tappy-tap-tap pneumatic maintenance.

  • 5
    Great multifunction tool

    Posted by Brandon on May 7th 2018

    If you're needing to reduce the number of tools you carry, this is a great item to pick up. Ratchet action is smooth and holds up to the hammer 'function' easily. It is rather awkward to use one handed, but dealing with the large size hardware that is common with 1/2" drive sockets means that you are unlikely to be doing too many things one handed with this. The ratchet drive size also means that if you're running a cordless impact, you can just carry one socket set for both. Breaker bar extension gives a great leverage addition, though it says not to use as a hammer with extension. Only complaint is the rubber hammer cap is hard to get back onto the head fully. The tabs on it that hold it onto the hammer like to fold under themselves. As I doubt I will be using it very often, I'm not really concerned about it.

  • 5
    the smatchet

    Posted by D.O on Dec 30th 2017

    If you have ever felt guilty while hammering at a stuck piece with the head of your nice chrome whatever brand ratchet, get this. You won't be able to break it and it will get some serious work done. I go for this when a part won't submit nicely. The extended handle means you will win, broken bolts or not.

  • 5
    Got a lot of concrete anchors to beat in?
    Unknown

    Posted on Mar 30th 2016

    Look no further! Formidable driving force, ergonomic handle and multi-tool utility all in one!

  • 5
    kloss 1/2 drive

    Posted by Stephen Zdravecky on Mar 1st 2016

    What a tool! Is it a hammer? Is it a pry bar? Is it a 1/2 inch ratchet? Yes it is all of them and wow is it well made. All the other 1/2 drive ratchets would not even peek out of the tool box to see this newcomer. He will be clipped to my side.

  • 5
    Best Ever!!

    Posted by Kegan Parks on Feb 26th 2016

    Got to use it to replace a wheel bearing on my Subaru wrx. So sad i had to get it dirty, but its the absolute best! All of my friends know about Kctools now.

  • 5
    Ratchet is a beast

    Posted by Grant Grein, Jr. on Dec 2nd 2014

    This ratchet will take a lifetime of beating. If clearance is an issue the head of this ratchet is a little large and might not be suitable for those applications. Also you will need to use an extension on big sockets for which the hammer portions of the Koloss ratchet will be in the way. If you need more leverage there is an included breaker bar extension. -

!